Service Manual

3 Connect the battery cable to the system board.

4 Install the base cover.

5 Follow the procedures in After Working Inside Your Computer.

PCIe Solid State Drive (SSD)

Removing M.2 Solid State Drive -SSD

1 Follow the procedures in Before Working Inside Your Computer

2 Remove the:

a base cover

b battery

3 Remove the M2x3 (1) screw that secures the M.2 solid-state drive (SSD) to the system board [1].

4 Lift the M.2 solid-state drive (SSD) from the system board [2].

5 Pull the SSD card thermal pad to access the bare SSD card.

Disassembly and reassembly