Service Manual

NOTE: There are two power button options:

• Power button function with light indicator.

• Power button with ngerprint reader function without light indicator (optional).

b Release the Mylar tape that secures the power button board to the system chassis [2].

c Remove the M2x3 screw that secures the power button board to the system chassis [3].

d Disconnect and release the adhesive data cable from the system chassis [4]

e Lift the power button board away from the system chassis [5].

Installing power button with ngerprint reader

1 Place the power button into the slot on the system chassis.

NOTE

: There are two power button options:

• Power button function with light indicator.

• Power button with ngerprint reader function without light indicator (optional).

2 Connect the adhesive data cable to the system chassis .

3 Replace the M2x3 screw that secures the power button board to the system chassis.

4 Replace the Mylar tape that secures the power button board to the system chassis.

5 Replace the M2x4 (2) screws that secure the power button to the system board.

6 Install the:

Disassembly and reassembly