Service Manual

Installing the Display Assembly

1 Place the palm-rest assembly at the edge of the table with the speakers facing away from the edge.

2 Align the screw holes on the palm-rest assembly with the screw holes on the display hinges.

3 Replace the M2.5 x 5 (6) screws that secure the display hinges to the palm-rest assembly.

4 Route thetouchscreen cable through the routing guides on the fan.

5 Connect thetouchscreen cable and display cable to the system board.

6 Replace the screw (2) that secures the display-cable bracket to the system board.

7 Install the:

a Battery

b Base cover

8 Follow the procedures in After Working Inside Your Computer

Antenna

Disassembly and reassembly