Owners Manual

Table 35. System setup options—Power menu (continued)
Power
By default, Optimized is selected.
USB Wake Support
Wake on Dell USB-C Dock Enables connecting a Dell USB-C Dock to wake the computer from Standby.
Default: ON
Block Sleep Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF
NOTE: If enabled, the computer will not go to sleep, Intel Rapid Start will be
disabled automatically, and the operating system power option will be blank if it
was set to Sleep.
Lid Switch
Enable Lid Switch Enables or disables the lid switch.
Default: ON
Power On Lid Open Enables the computer to power up from the off state whenever the lid is opened.
Default: ON
Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. Setting this option to
enable allows the operating system to select the appropriate processor performance
automatically.
Default: ON
Table 36. System setup options—Security menu
Security
TPM 2.0 Security On Select whether or not the Trusted Platform Model (TPM) is visible to the OS.
Default: ON
PPI Bypass for Enable Commands Enables or disables the OS to skip BIOS Physical Presence Interface (PPI) user
prompts when issuing TPM PPI enabled and activate commands.
Default: OFF
PPI Bypass for Disable Commands Enables or disables The OS to skip BIOS PPI user prompts when issuing TPM PPI
Disable and Deactivate commands.
Default: OFF
PPI Bypass for Clear Commands Enables or disables the operating system to skip BIOS Physical Presence Interface
(PPI) user prompts when issuing the Clear command.
Default: OFF
Attestation Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS.
Disabling this setting restricts the ability to use the TPM for signature operations.
Default: ON
Key Storage Enable Enables to control whether the TPM Endorsement Hierarchy is available to the OS.
Disabling this setting restricts the ability to use the TPM for storing owner data.
Default: ON
SHA-256 Enables or disables the BIOS and the TPM to use the SHA-256 hash algorithm to
extend measurements into the TPM PCRs during BIOS boot.
Default: ON
Konfigurace systému 29