Owners Manual

Table 33. System setup options—Display menu (continued)
Display
Brightness on AC power Sets the screen brightness when the computer is running on AC power.
Default: 0
Touch Screen Enables or disables the touch screen for the OS.
NOTE: The touch screen will always work in the BIOS setup irrespective of this
setting.
Full Screen Logo Enabled or disabled the computer to display full screen logo if the image match
screen resolution.
Default: OFF
Direct Graphics Controller Direct
Output Mode
When enabled, all graphics output ports directly to the Graphics Processing Unit
(GPU), bypassing Intel Integrated graphics outputs for HDMI, Thunderbolt, and mDP
ports.
Default: OFF
Table 34. System setup options—Connection menu
Connection
Wireless Device Enable Enable or disable internal WLAN/Bluetooth devices.
By default, WLAN is selected.
By default, Bluetooth is selected.
Enable UEFI Network Stack
Enable UEFI Network Stack When enabled, UEFI networking protocols are installed and available, allowing pre-OS
and early OS networking features to use any enabled NICs. This may be used without
PXE turned on.
Default: ON
Wireless Radio Control
Control WLAN radio Enables to sense the connection of the computer to a wired network and
subsequently disable the selected wireless radios (WLAN and/or WWAN). Upon
disconnection from the wired network, the selected wireless radios are re-enabled.
Default: OFF
Table 35. System setup options—Power menu
Power
Battery Configuration Enables the computer to run on battery during power usage hours. Use the below
options to prevent AC power usage between certain times of each day.
By default Adaptive is selected.
Advanced Configuration
Enable Advanced Battery Charge
Configuration
Enables Advanced Battery Charge Configuration from the beginning of the day to a
specified work period. Advanced Battery Charged maximizes battery health while still
supporting heavy use during the work day.
Default: OFF
Peak Shift Enables the computer to run on battery during peak power usage hours.
Default: OFF
Thermal Management Sets cooling fan and processor heat management to adjust system performance,
noise, and temperature.
By default, Optimized is selected.
28 Järjestelmäasetukset