Owners Manual

The following image indicates the location of the M.2 2230 solid-state drive that is installed in the SSD2 slot and provides a visual

representation of the removal procedure.

Steps

1. Remove the screw (M2x4) that secures the solid-state drive to the palm-rest and keyboard assembly.

2. Slide and lift the solid-state drive off the SSD2 slot on the system board.

Installing the M.2 2230 solid-state drive in the SSD2 slot

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

NOTE: This procedure applies only to computers shipped with an M.2 2230 solid-state drive installed in the SSD2 slot.

NOTE: Depending on the configuration ordered, your computer may support an M.2 2230 solid-state drive or an M.2

2280 solid-state drive in the SSD2 slot.

NOTE: Install the solid-state drive mounting bracket, if it is not installed.

The following image indicates the location of the M.2 2230 solid-state drive that is installed in the SSD2 slot and provides a visual

representation of the installation procedure.

Disassembly and reassembly