Owners Manual

Steps

1. In reverse sequential order (as indicated by the numbers on the heat sink), remove the screws that secure the heat sink to the system

board.

• Heat sink for system boards with integrated graphics card: four screws (M2.5x6)

• Heat sink for system boards with discrete graphics card: six screws (M2.5x6)

2. Lift the heat sink off the system board.

Installing the heat sink

Prerequisites

CAUTION: Incorrect alignment of the heat sink can damage the system board and the processor.

NOTE: If either the system board or the heat sink is replaced, use the thermal pad or thermal paste provided in the kit to

ensure that there is thermal conductivity.

About this task

The following image indicates the location of the heat sink and provides a visual representation of the installation procedure.

Disassembly and reassembly