Owners Manual

Installing the expansion card

1. Align and place the expansion card to the PCIe slot on the system board.

2. Press it down so that it is securely seated on the slot.

NOTE: For expansion card with VGA power, connect the data or power cable to the expansion card.

3. Rotate both the expansion card locking latch forward, on the filler bracket, to secure the expansion card to the system board.

4. Install the side cover.

5. Follow the procedure in After working inside your computer.

Coin cell battery

Removing the coin cell battery

1. Follow the procedure in Before working inside your computer.

2. Remove the:

a) side cover

3. To remove the coin cell battery:

a) Press the release latch [1] away from the battery to allow the battery to pop-up from the socket [2].

Removing and installing components