Owners Manual

3. Connect the fan cable to the system board.

4. Route the following cables through the cable holder and connect to the system board:

• SATA and ODD cables

• USB 3.1 cable

5. Install the:

a) PCIe holder

b) front bezel

c) side cover

6. Follow the procedure in After working inside your computer.

VROC module

Removing the VROC module

Plug-out the VROC module from the system board in the upward direction.

Installing the VROC module

Plug-in the VROC module to the system board.

Removing and installing components