Owners Manual

Option Description
• Disabled—Default
• Reboot bypass
Password Change
Allows you to change the System password when the administrator password is set.
• Allow Non-Admin Password Changes
This option is set by default.
UEFI Capsule Firmware
Updates
Allows you to update the system BIOS via UEFI capsule update packages.
• Enable UEFI Capsule Firmware Updates
This option is set by default.
TPM 1.2 Security
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
• TPM On(Default)
• Clear
• PPI Bypass for Enable Commands
• PPI Bypass for Disable Commands
Click any one of the following:
• Enabled—Default
• Disabled
Computrace (R)
Allows you to activate or disable the optional Computrace software.
The options are:
• Deactivate—Default
• Disable
• Activate
Chassis Intrusion
Allows you to control the chassis intrusion feature.
Click one of the following options:
• Disabled—Default
• Enabled
• On-Silent
CPU XD Support
Allows you to enable the Execute Disable mode of the processor.
• Enable CPU XD Support
This option is set by default.
OROM Keyboard Access
Allows you to determine whether users are able to enter the Option ROM Configuration screens via
hotkeys during boot. The options are:
Click one of the following options:
• Enabled—Default
• One Time Enable
• Disabled
Admin Setup Lockout
Allows you to prevent users from entering Setup when an administrator password is set.
• Enable Admin Setup Lockout
This option is not set by default.
Master Password Lockout
Allows you to disable master password support.
• Enable Master Password Lockout
System Setup 95