Owners Manual

Installing the WLAN Card

1 Insert the WLAN card in its slot on the computer.

2 Route the antenna cables through the routing channel and connect them to the WLAN card.

3 Align the shield and tighten the M2.0x3.0 screw to secure the WLAN card to the computer.

4 Install the:

a base cover

b battery

c battery cover

5 Follow the procedures in After working inside your computer.

Solid State Drive — optional

Removing the M.2 Solid State Drive -SSD module

1 Follow the procedures in Before working inside your computer.

2 Remove the:

a battery cover

b battery

c base cover

3 To remove the SSD module:

a Remove the M2.0x3.0 screw that secures the thermal plate to the computer.

b Remove the thermal plate from the computer.

c Remove the M2.0x3.0 screw that secures the SSD to the computer.

d Remove the SSD away from the computer.

Disassembly and reassembly