Owners Manual

Steps

1. For M.2 2280 SSD:

a. Place the M.2 SSD onto its slot on SSD carrier.

2. For M.2 2230 SSD:

a. Place the M.2 SSD into the SSD holder.

b. Replace the (M2x2) screw to secure the M.2 SSD to the holder.

c. Place the M.2 SSD with its holder on the SSD carrier.

3. Place the thermal plate above the M.2 SSD module.

4. Replace the (M2x3) screw to secure the SSD thermal plate to the M.2 SSD.

5. Replace the SSD module in its slot on the computer.

6. Replace the (M2x3) screw to secure the SSD module in place.

Next steps

1. Install the SSD door.

2. Install the SD card.

3. Follow the procedure in after working inside your computer.

ベースカバー

Removing the base cover

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the SD card.

About this task

The figure indicates the location of the base cover and provides a visual representation of the removal procedure

分解および再アセンブリ