Owners Manual

Installing the keyboard lattice

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the M.2 SSD and provides a visual representation of the installation procedure.

Steps

1. Align the keyboard lattice to its position on the keyboard.

2. Press the edges on the keyboard lattice until it clicks into place.

Next steps

1. Install the base cover.

2. Install the SD card.

3. Follow the procedure in after working inside your computer.

キーボード

Removing the keyboard

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the SD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the keyboard lattice.

分解および再アセンブリ