Owners Manual

電源アダプターポート

Removing the power-adapter port

Prerequisites

1. Follow the procedure in before working inside your computer.

2. Remove the SD card.

3. Remove the base cover.

4. Remove the battery.

5. Remove the heat-sink assembly.

About this task

The figure indicates the location of the power-adapter port and provides a visual representation of the removal procedure.

Steps

1. Remove the (M2x3) screw that secures power-adapter cable bracket.

2. Remove the power-adapter cable bracket from the computer.

3. Lift the power-adapter port from its slot on the palmrest.

4. Unroute and remove the power-adapter cable from the computer.

Installing the power-adapter port

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The figure indicates the location of the power-adapter port and provides a visual representation of the installation procedure.

分解および再アセンブリ