Owners Manual

Steps

1. Align and place the speaker module into its slot on the top edge of the palmrest.

2. Adhere the three piece adhesive tape to secure the speaker cable in place on the palmrest.

Next steps

1. Install the system board.

2. Install the GPU card.

3. Install the GPU power cable.

4. Install the inner frame.

5. Install the heat-sink assembly.

6. Install the primary memory.

7. Install the keyboard.

8. Install the keyboard lattice.

9. Install the WLAN card.

10. Install the WWAN card.

11. Install the secondary memory.

12. Install the SIM card.

13. Install the primary M.2 SSD.

14. Install the battery.

15. Install the base cover.

16. Install the secondary M.2 SSD.

17. Install the SSD door.

18. Install the SD card.

19. Follow the procedure in after working inside your computer.

分解および再アセンブリ