CLI Guide

BIOS.IntegratedDevices.EmbNic4 (Read or Write)
Description
Legal Values
● Enabled
● EnabledPxe
● EnablediScsi
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.EmbNicPort1BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Embedded NIC port number. This attribute is for system management software use, and does not appear
in System BIOS Setup. This attribute always returns Unknown when read. There is no change to the LOM
Port Legacy Boot Protocol setting when Unknown is written. An error is returned if written with a setting
(None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
● Unknown
● None
● Pxe
● Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.EmbNicPort2BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Embedded NIC port number. This attribute is for system management software use, and does not appear
in System BIOS Setup. This attribute always returns Unknown when read. There is no change to the LOM
Port Legacy Boot Protocol setting when Unknown is written. An error is returned if written with a setting
(None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
● Unknown
● None
● Pxe
● Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS Attributes 143