CLI Guide

Table Of Contents
None
Pxe
Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.IntNic2Port2BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Integrated Network Card number and port number. This attribute is for system management software
use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
There is no change to the LOM Port Legacy Boot Protocol setting when Unknown is written. An error is
returned if written with a setting (None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
Unknown
None
Pxe
Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.IntNic2Port3BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Integrated Network Card number and port number. This attribute is for system management software
use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
There is no change to the LOM Port Legacy Boot Protocol setting when Unknown is written. An error is
returned if written with a setting (None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
Unknown
None
Pxe
Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.IntNic2Port4BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Integrated Network Card number and port number. This attribute is for system management software
use, and does not appear in System BIOS Setup. This attribute always returns Unknown when read.
There is no change to the LOM Port Legacy Boot Protocol setting when Unknown is written. An error is
returned if written with a setting (None, PXE, or iSCSI) that is not supported by the LOM Port.
150 BIOS Attributes