CLI Guide

BIOS.RedundantOsControl.RedundantOsLocation (Read or Write)
Description
Specifies the backup device for the Redundant OS Control feature. When Redundant OS Boot is set to
Enabled, the BIOS will boot to this device. Note: 1) SD Card Port, Internal USB Port, M.2 cards - If a
device is set as the Redundant OS Location, then the corresponding device setting will be set based on
Redundant OS state and not be available to be changed in Integrated Devices. 2) Embedded SATA - must
be set to anything other than Off for SATA ports to show up as optional backup devices
Legal Values
● *Dynamic*
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.RedundantOsControl.RedundantOsState (Read or Write)
Description
When set to Hidden, the device specified by Redundant OS Location will be hidden. It will not be visible in
the Operating System or the BIOS boot sequence.
Legal Values
● Visible
● Hidden
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SataSettings
Use the objects in this group to configure the BIOS SATA settings.
BIOS.SataSettings.EmbSata (Read or Write)
Description
Configures the embedded SATA to be set to Off, AHCI, or RAID Mode.
RAID option is suppressed if platform does not support SWRAID. Does R330 support SW RAID based on
chassis? Ata Mode was deprecated with 13G and is removed in 14G and later.
Legal Values
● Off
● AtaMode
● RaidMode
● AhciMode
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS Attributes 347