CLI Guide

Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is set
to Standard if the System Profile is set to Performance Per Watt (DAPC), Performance Per Watt (OS),
Performance Per Watt (HWPM), or Performance. Is set to Extended if the System Profile is set to Dense.
Legal Values
● Standard
● Extended
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SysProfileSettings.MemPwrMgmt (Read or Write)
Description
When set to Enabled, the memory can operate in Power Management Mode. Read-only unless System
Profile is set to Custom.
Not supported on 13G+.
Legal Values
● Enabled
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SysProfileSettings.MemRefreshRate (Read or Write)
Description
The memory controller will periodically refresh the data in memory. The frequency at which memory is
normally refreshed is referred to as 1X refresh rate. When memory modules are operating at a higher than
normal temperature or to further increase system reliability, the refresh rate can be set to 2X, but may
have a negative impact on memory subsystem performance under some circumstances. Read-only unless
System Profile is set to Custom.
Has a dependency on the System Profile. Can only be set if the System Profile is set to Custom. Is
set to 1X if the System Profile is set to Performance Per Watt (DAPC), Performance Per Watt (OS),
Performance Per Watt (HWPM), or Performance. Is set to 2X if the System Profile is set to Dense.
Legal Values
● 1x
● 2x
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.SysProfileSettings.MemVolt (Read or Write)
Description
Sets the DIMM voltage selection. When set to Auto the system will automatically set the system voltage
to the optimal setting based upon the DIMM capability and the installed DIMM population. Also enables
setting the system DIMM voltage to a higher (1.5V) setting if the DIMMs support multiple voltages and
have been Auto set to a lower voltage. Read-only unless System Profile is set to Custom.
BIOS Attributes 387