CLI Guide

FC.PortConfig.PortSpeed (Read or Write)
Description
Specifies the data rate of the Fibre Channel Host Bus Adapter port. Value can be Automatic or specified
in Gbps.
Legal Values
● Auto
● 1G
● 2G
● 4G
● 8G
● 16G
● 32G
Default Value Auto
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.PortConfig.VirtualWWN (Read or Write)
Description
Virtual Fibre Channel World Wide Node Name is used instead of the permanent World Wide Node Name
when its value is different
Legal Values None
Default Value None
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.PortConfig.VirtualWWPN (Read or Write)
Description
Virtual Fibre Channel World Wide Port Name of the port is used instead of the permanent World Wide
Port Name when its value is different
Legal Values None
Default Value None
Write Privilege Server Configuration
License Required
Dependency Not Applicable
FC.PortConfig.WWN (Read Only)
Description
Permanent Fibre Channel World Wide Node Name assigned during manufacturing.
Legal Values None
Default Value None
Write Privilege None
License Required
Dependency Not Applicable
FC Attributes 433