CLI Guide

iDRAC.IPBlocking
This group contains the attributes that provides details about IP Blocking.
iDRAC.IPBlocking.BlockEnable (Read or Write)
Description
Enables or disables the IPv4 address blocking feature of iDRAC.
Legal Values
● Disabled-0
● Enabled-1
Default Value 1
Write Privilege Configure iDRAC
License Required
Dependancy None
iDRAC.IPBlocking.FailCount (Read or Write)
Description
Specifies the maximum number of login failures to occur within the window before login attempts from
the IP address are rejected.
Legal Values
● Integral values from 2 to 16
Default Value 3
Write Privilege Configure iDRAC
License Required
Dependancy None
iDRAC.IPBlocking.FailWindow (Read or Write)
Description
Defines the time span in seconds that the failed attempts are counted.
Legal Values
● Integral values from 10 to 65535
Default Value 60
Write Privilege Configure iDRAC
License Required
Dependancy None
iDRAC.IPBlocking.PenaltyTime (Read or Write)
Description
Defines the time span in seconds that session requests from an IP address with excessive failures are
rejected.
Legal Values
● Integral values from 2 to 65535
Default Value 60
Write Privilege Configure iDRAC
License Required
Dependancy None
504 iDRAC Attributes