CLI Guide

Legal Values
● Disabled-0
● Enabled-1
Default Value 1
Write Privilege Configure iDRAC
License Required iDRAC Basic
Dependancy None
iDRAC.iSMExtensions.OEMIDLMEState (Read Only)
Description
The following attribute is defined to be set by PM to control the enablement of the complete feature in
the required personality of the server.
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Not Applicable
License Required iDRAC Basic
Dependancy None
iDRAC.KMS
The objects in this group help to set username and password for the Key Management Server (KMS) connection.
NOTE:
Run the racadm sekm enable command after changing any iDRAC KMS attributes. This action validates if the
changes are valid and iDRAC can communicate with the KMS.
iDRAC.KMS.iDRACGroupName (Read or Write)
Description
Specifies the Group Name on the Key Management server to which this iDRAC belongs.
Legal Values
● String of up to 255 ASCII characters.
Default Value None
Write Privilege Configure iDRAC
License Required
Dependancy None
iDRAC.KMS.iDRACPassword (Read or Write)
Description
Specifies the password for the iDRAC account on the Key Management server.
Legal Values
● String of up to 256 ASCII characters.
Default Value None
Write Privilege Configure iDRAC
License Required
Dependancy None
iDRAC Attributes 541