CLI Guide

iDRAC.TelemetryNVMeLog.DevicePollFrequency (Read Only)
Description
Displays the frequency at which the devices are polled.
Legal Values
● Integral values from 0 to 600
Default Value 0
Write Privilege Configure iDRAC
License Required Y
Dependancy None
iDRAC.TelemetryNVMeLog.EnableTelemetry (Read or Write)
Description
Enables or disables the Telemetry Report.
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure iDRAC
License Required Y
Dependancy None
iDRAC.TelemetryNVMeLog.IsGroupInstanceValid (Read Only)
Description
Indicates if the group instance is valid.
Legal Values
● Integral values from 0 to 1
Default Value 1
Write Privilege Configure iDRAC
License Required Y
Dependancy None
iDRAC.TelemetryNVMeLog.ReportInterval (Read or Write)
Description
Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0
will stop the interval-based report generation.
Legal Values
● Integral values from 0 to 7200
Default Value 0
Write Privilege Configure iDRAC
License Required Y
Dependancy None
iDRAC.TelemetryNVMeLog.ReportTriggers (Read or Write)
Description
Allows to configure the predefined triggers for report generation.
766 iDRAC Attributes