CLI Guide

Default Value 2
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Need valid username and password to set the attribute. The value could not be set to none if privacy
protocol is not none.
iDRAC.Users.EmailAddress (Read or Write)
Description
Specifies the email address to use for Simple 2FA for the user.
Legal Values
● String of up to 254 ASCII characters.
Default Value None
Write Privilege Configure User
License Required
Dependancy Both UserName and Password must be configured prior to setting a value.
iDRAC.Users.Enable (Read or Write)
Description
Enables or Disables an individual user
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Both UserName and Password must be configured prior to enabling user
iDRAC.Users.ETAG (Read Only)
Description
ETAG will contain the timestamp of last change made to any of the attributes in the user group
Legal Values
● String of up to 16 ASCII characters.
Default Value 000000
Write Privilege Configure User
License Required iDRAC Basic
Dependancy None
iDRAC.Users.IPMIKey (Read or Write)
Description
IPMI key is used for IPMI authentication
Legal Values
● String of up to 64 ASCII characters.
Default Value None
Write Privilege Configure User
License Required iDRAC Basic
iDRAC Attributes 813