CLI Guide

Dependancy Cannot be set without User Name being set first
iDRAC.Users.PrivacyProtocol (Read or Write)
Description
The Privacy Protocol for SNMP v3
Legal Values
● None-0
● DES-1
● AES-2
Default Value 2
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Need valid username and password to set the attribute. The value could not be set to AES or DES if
authentication protocol is none.
iDRAC.Users.Privilege (Read or Write)
Description
Specifies the role-based authority privileges allowed for the user. Below list shows the decimal values for
each individual privilege. To create a custom privilege, add up the privilege decimal values and set the
attribute to the value. Login - 1, Configure - 2, Configure Users - 4, Logs - 8, System Control - 16, Access
Virtual Console - 32, Access Virtual Media - 64, System Operations - 128, Debug - 256
Legal Values
● Integral values from 0 to 511
Default Value 0
Write Privilege Configure User
License Required iDRAC Basic
Dependancy Both UserName and Password must be configured prior to sets
iDRAC.Users.ProtocolEnable (Read or Write)
Description
Enable SNMP v3 Protocol
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure User
License Required iDRAC Basic
Dependancy None
iDRAC.Users.RSASecurID2FA (Read or Write)
Description
Enables or disables RSA SecurID 2 Factor Authentication for the user.
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure User
iDRAC Attributes 815