CLI Guide

InfiniBand.IscsiGenParams.ChapMutualAuth (Read or Write)
Description
To use mutual CHAP authentication, specifies an initiator secret on the Initiator Parameters page and
configure that secret on the target.
Legal Values
● Enabled
● Disabled
Default Value None
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependancy None
InfiniBand.IscsiGenParams.IpVer (Read or Write)
Description
Controls whether IPv4 or IPv6 network addressing will be used for iSCSI initiator and targets.
Legal Values
● IPv4
● IPv6
● None
Default Value N/A
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependancy None
InfiniBand.IscsiGenParams.IscsiTgtBoot (Read or Write)
Description
Controls whether the iSCSI initiator will boot to the specified iSCSI target after connection. One Time
Disabled disables iSCSI boot for the next (current) boot, after which it is enabled.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependancy None
InfiniBand.IscsiGenParams.IscsiViaDHCP (Read or Write)
Description
Enables the acquisition of iSCSI target parameters from DHCP.
Legal Values
● Enabled
● Disabled
Default Value None
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependancy None
InfiniBand Attributes 851