CLI Guide

NIC.FCOECapabilities.MaxNumberOfFCTargets (Read Only)
Description
The maximum number of FC targets supported.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.FCOECapabilities.MaxNumberOutStandingCommands (Read
Only)
Description
The maximum number of outstanding commands supported across all sessions.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.FCOECapabilities.MTUReconfigurationSupport (Read Only)
Description
Indicates whether the MTU Reconfiguration capability is supported.
Legal Values
● Available
● Unavailable
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.FCOEConfiguration
The following section provides information about the objects in the NIC.FCOEConfiguration group.
NIC.FCoEConfiguration.BootOrderFirstFCoETarget (Read or
Write)
Description
Setting to specify whether and in what order a boot from the port's first defined target is attempted.
The current implementation allows for four potential boot targets to be defined per FCoE boot-capable
port. Each target carries a boot order attribute. From all of the targets defined in all the vendors FCoE
boot ports in the system, the user may select a maximum of four targets to attempt to boot from,
assigning a boot order value from one to four (first to last). Targets not selected must be given a value
of 0. The settings of one to four must be unique in the system; there must be no duplication of the
values one to four in either the same port or in different ports across the system. The driver will enforce
900 NIC Attributes