CLI Guide

Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtIscsiName (Read or Write)
Description
The iSCSI Qualified Name (IQN) of the second target
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.IscsiSecondTgtParams.SecondTgtTcpPort (Read or Write)
Description
TCP Port number of second iSCSI target
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.LnkSpeedConfig
To configure the link speed, use the objects in this group.
NIC.LnkSpeedConfig.100Gbps1 (Read or Write)
Description
Speed selector for the specified link speed to be advertised to the link partner for boot protocol
operations and possibly including Wake On LAN and shared LOM management features if separate Vaux
link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and
should be greyed out when set to Auto. Note: The speed selection shall only be included if it is supported
in the implementation.
Legal Values
● True
● False
Default Value True
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.LnkSpeedConfig.100Gbps2 (Read or Write)
Description
Speed selector for the specified link speed to be advertised to the link partner for boot protocol
operations and possibly including Wake On LAN and shared LOM management features if separate Vaux
link speed control is not supported. This setting is only valid when LnkSpeedMethod is set to Manual and
NIC Attributes 921