CLI Guide

License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.NICConfig.FWBootProtocol (Read or Write)
Description
Selection of the boot protocol for the CNA port when the boot process is local to the controller.
Legal Values
● Legacy PXE
● UEFI iSCSI HBA
● UEFI FCoE
● None
Default Value varies
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.NICConfig.HideSetupPrompt (Read or Write)
Description
Enable/Disable the option ROM setup prompt (banner) during POST.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC.NICConfig.LegacyBootProto (Read or Write)
Description
Selection of the boot protocol for the port to use in legacy BIOS (non-UEFI) boot mode. The default value
of the setting varies by implementation and is defined in ENG0012856.
Legal Values
● PXE
● iSCSI
● FCoE
● None
● iSCSI Primary
● iSCSI Secondary
● iPXE without failover
● iSCSI without failover
Default Value varies
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not Applicable
NIC Attributes 927