CLI Guide

● Idle-1
Default Value 0
Write Privilege Not Applicable
License Required iDRAC Datacenter
Dependancy None
System.IdleServerDetection.IdleServerThreshold (Read or Write)
Description
Idle server detection threshold in %
Legal Values
● Integral values from 0 to 50
Default Value 20
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
System.IdleServerDetection.ServerUtilizationPercentile (Read or
Write)
Description
Server utilization percentile indicates how many % of samples are above utilization threshold
Legal Values
● Integral values from 80 to 100
Default Value 80
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
System.LCD
NOTE:
The System.LCD get and set commands work on iDRAC on Blade Server, even if the LCD is not present on the
server.
NOTE: You can change the LCD group attributes for monolithic servers even if the LCD is not present on servers.
This group contains the attributes that provide details about System.LCD.
System.LCD.ChassisIdentifyDuration (Read or Write)
Description
Enable/Disable chassis Identify. A value of -1 = force on indefinitely; 0 = 0ff; > 0 number of seconds
chassis identify is on
Legal Values
● Integral values from -1 to 2592000
Default Value 0
Write Privilege Server Configuration
License Required iDRAC Basic
Dependancy None
System Attributes 993