Owners Manual

Table 6. System Configuration (continued)
Option Description
7920 Tower
● SATA–0
● SATA–1
● SATA–2
● SATA–3
● SATA–4
● SATA–5
● SATA–6
● SATA–7
● SATA–8
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID
controller card, the hard drives will display {none} in all the
fields. The hard drives can be seen in the RAID controller
card BIOS.
PCIe Drives
Allows the enabling of Front PCIe attached Ports.
● MiniSAS PCIe SSD-0
● MiniSAS PCIE SSD-1
● MiniSAS PCIe SSD-2
● MiniSAS PCIE SSD-3
Default Setting: All drives are enabled.
SMART Reporting This field controls if the hard drive errors for the integrated
drives are reported during system startup. This technology is
part of the SMART (Self Monitoring Analysis and Reporting
Technology) specification.
● Enable SMART Reporting - This option is disabled by
default.
USB Configuration Allows you to enable or disable the internal USB configuration.
The options are:
● Enable Boot Support
● Enable Front USB Ports
● Enable internal USB ports
● Enable rear USB Ports
HDD Fans Allows you to control the HDD fans.
Default Setting: depends on the system configuration
Audio Allows you enable or disable the audio feature.
● Enable Audio (Default)
Memory Map IO above 4GB Allows you enable or disable Memory Map IO above 4GB.
● Memory Map IO above 4GB - This option is disabled by
default.
Thunderbolt Allows you to enable or disable Thunderbolt device support
capability.
● Enabled
● Disabled (Default)
Miscellaneous devices Allows you to enable or disable various on board devices.
● Enable Secure Digital (SD) Card (Default On)
● Secure Digital (SD) Card Read Only Mode
● Secure Digital (SD) Card Boot
Intel VMD Technology Allows you to enable or disable VMD on the front PCIe bays.
102 System Setup