Owners Manual

Table 10. Performance (continued)
Option Description
● 5
● 6
● 7
● 8
NOTE:
● The options displayed could be different depending on
the installed processor(s).
● The options depend on the number of cores supported
by the installed processor (All, 1, 2, N-1 for N-Core
Processors)
Intel SpeedStep Allows you to enable or disable the Intel SpeedStep feature.
Default Setting: Enable Intel SpeedStep
C States Allows you to enable or disable the additional processor sleep
states.
Default Setting: Enabled
Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of
the processor.
Default Setting: Enable Intel TurboBoost
Hyper-Thread Control Allows you to enable or disable the HyperThreading in the
processor.
Default Setting: Enabled
Cache Prefetch
Default Setting: Enable Hardware Prefetch and Adjacent
Cache Line Prefetch
Dell Reliable Memory Technology (RMT) Allows you to identify and isolate memory errors in system
RAM..
Default Setting: Enable Dell Reliable Memory Technology
(RMT)
System Isochronous Mode
Allows you to enable or disable this mode to reduce latency of
memory transactions at the expense of bandwidth. :
Click one of the options:
● Disabled(Default)
● Enabled
RAS Support
Allows you to report or log errors caused by memory failures,
the PCIe failures, CPU failures. The options are:
● Enable on Memory modules
● Enable on PCIe modules
● Enable on CPU modules
The options are not set by default.
System Setup 105