Owners Manual

Table Of Contents
h. front bezel
i. side cover
5. Flip the system to connect the SATA 0 cable to the connector on the system board.
6. Install the right side cover
7. Follow the procedure in After working inside your computer
RAID controller battery
Removing the RAID controller battery
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. To remove the RAID controller battery:
a. Disconnect the RAID controller battery cable from the RAID controller card.
b. Push the securing tab out to release the RAID controller battery.
c. Lift and remove the RAID controller battery.
Installing the RAID controller battery
1. Slide and place the RAID controller battery into the RAID battery bracket.
2. Press the RAID controller battery into the bracket to secure with the securing clips.
3. Connect the RAID controller battery cable.
VROC module
Removing the VROC module
Plug-out the VROC module from the system board in the upward direction.
Installing the VROC module
Plug-in the VROC module to the system board.
Removing and installing components
85