Owner's manual

5. Flip the keyboard and disconnect the keyboard cable from the system board.

Installing the Keyboard

1. Connect the keyboard cable to the system board.

2. Place the keyboard to align with the screw holders on the computer.

3. Tighten the screws to secure the keyboard to the palmrest assembly.

4. Insert the keyboard trim on the keyboard and press along the sides until it snaps in place.

5. Install the battery.

6. Follow the procedures in After Working Inside Your Computer.

Removing the Palmrest Assembly

1. Follow the procedures in Before Working Inside Your Computer.

2. Remove:

a. SD card

b. ExpressCard

c. battery

d. keyboard

e. display-hinge cap