Service Manual

11. Lift the right edge of the I/O board upwards to disengage the connector and

remove from the system.

Installing The Input/Output Board

1. Place the Input/Output (I/O) board on the system and ensure the connector

is properly engaged to the matching connector on the system board.

2. Tighten the single screw securing the I/O board in place.

3. Connect the ExpressCard cable.

4. Install the

palm rest

5. Install the

hard drive

6. Install the

optical drive

7. Install the

keyboard

8. Install the

keyboard trim

9. Install the

base cover

10. Install the

battery

11. Follow the procedures in

After Working Inside Your Computer