Dell Precision™ M60 Series Mobile Workstation User's Guide Finding Information Documentation Updates Using Microsoft® Windows® Using Devices Using the Dell™ Drivers and Utilities CD Fixing Problems Installing Parts About Your Computer Left View Right View Back View Bottom View Using Microsoft® Windows® XP Help and Support Center Switching to Classic View Desktop Cleanup Wizard User Accounts and Fast User Switching Files and Settings Transfer Wizard Program Compatibility Wizard Home and Small Office Networki
Pentium are registered trademarks and Intel Speedstep and Centrino are trademarks of Intel Corporation; Microsoft, Windows, Windows NT, a n d MS-DOS are registered trademarks of Microsoft Corporation; Bluetooth is a trademark owned by Bluetooth SIG, Inc. and is used by Dell Computer Corporation under license; ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency.
Back to Contents Page About Your Computer Dell Precision™ M60 Series Mobile Workstation User's Guide Front View Left View Right View Back View Bottom View Front View 1 display latch 8 speakers 2 display 9 track stick/touch pad buttons 3 power button 10 track stick 4 device status lights 11 volume control buttons 5 keyboard 12 mute button 6 touch pad 13 keyboard status lights 7 display latch button display latch — Keeps the display closed.
Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing. Turns on steadily or blinks to indicate battery charge status. Turns on when Bluetooth™ is enabled. To enable or disable Bluetooth, press . NOTE: Bluetooth is an optional feature, so the icon turns on only if you ordered Bluetooth with your computer.
The green lights located above the keyboard indicate the following: Turns on when the numeric keypad is enabled. Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled.
audio connectors Attach a microphone to the connector. Attach headphones or speakers to the connector. hard drive — Stores software and data. security cable slot — Lets you attach a commercially available antitheft device to the computer. For more information, see the instructions included with the device. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot.
security cable slot — Lets you attach a commercially available antitheft device to the computer. For more information, see the instructions included with the device. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot. module bay — You can install devices such as an optical drive or Dell TravelLite™ module in the module bay. For more information, see "Using the Module Bay." device latch release — Releases a device.
network connector (RJ-45) NOTICE: The network connector is slightly larger than the modem connector. To avoid damaging the computer, do not plug a telephone line in to the network connector. Connects the computer to a network. The green and yellow lights next to the connector indicate activity for both wired and wireless network communications. For information on using the network adapter, see the online network-adapter documentation supplied with your computer. See "Finding Information.
The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
docking device slot — Lets you attach your computer to a docking device. See the documentation that came with your docking device for additional information. fan — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating. NOTE: The computer turns on the fan when the computer gets hot. Fan noise is normal and does not indicate a problem with the fans or the computer.
Back to Contents Page Appendix Dell Precision™ M60 Series Mobile Workstation User's Guide Macrovision Product Notice Ergonomic Computing Habits Regulatory Notices Warranty and Return Policy Macrovision Product Notice This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
1 monitor screen at or below eye level 4 feet flat on the floor 2 monitor and keyboard positioned directly in front of the user 5 wrists relaxed and flat 3 monitor stand References: 1. American National Standards Institute. ANSI/HFES 100: American National Standards for Human Factors Engineering of Visual Display Terminal Workstations. Santa Monica, CA: Human Factors Society, Inc., 1988. 2. Human Factors and Ergonomics Society.
accessories.us.dell.com/sna/category.asp?category_id=4117. Most Dell computers are classified for Class B environments. However, the inclusion of certain options can change the rating of some configurations to Class A. To determine the electromagnetic classification for your computer or device, see the following sections specific for each regulatory agency. Each section provides country-specific EMC/EMI or product safety information. FCC Notices (U.S.
Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent, identification of the business, other entity, or individual sending the message, and the telephone number of the sending machine or such business, other entity, or
This Dell device is classified for use in a typical Class B domestic environment. A "Declaration of Conformity" in accordance with the preceding directives and standards has been made and is on file at Dell Computer Corporation Products Europe BV, Limerick, Ireland. CE Mark Notice This equipment complies with the essential requirements of the European Union Directive 1999/5/EC.
ENERGY STAR® Emblem The EPA's ENERGY STAR® Computers program is a joint effort between the EPA and computer manufacturers to reduce air pollution by promoting energyefficient computer products. The EPA estimates that use of ENERGY STAR® computer products can save computer users up to two billion dollars annually in electricity costs.
Class B ITE This is a Class B product based on the standard of the Voluntary Control Council for Interference (VCCI) for information technology equipment. If this equipment is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual.
Please note that this device has been approved for nonbusiness purposes and may be used in any environment, including residential areas. MIC Class B Regulatory Label If the regulatory label includes the following marking, your computer is a Class B product. Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a 3-prong socket).
BSMI Notice (Taiwan Only) If you find a or mark on the regulatory label on the bottom, side, or back panel of your computer, the following section is applicable:
NOM Information (Mexico Only) The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM): Exporter: Dell Computer Corporation One Dell Way Round Rock, TX 78682 Importer: Dell Computer de México, S.A. de C.V. Paseo de la Reforma 2620 - 11° Piso Col. Lomas Altas 11950 México, D.F. Ship to: Dell Computer de México, S.A. de C.V. al Cuidado de Kuehne & Nagel de México S. de R.I. Avenida Soles No. 55 Col.
Back to Contents Page Alert Standard Format (ASF) Dell Precision™ M60 Series Mobile Workstation User's Guide ASF is a DMTF management standard that specifies "pre-operating system" or "operating system absent" alerting techniques. The standard is designed to generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is turned off. ASF is designed to supersede previous operating system-absent alerting technologies.
Back to Contents Page Using a Battery Dell Precision™ M60 Series Mobile Workstation User's Guide Battery Performance Checking the Battery Charge Charging the Battery Removing a Battery Installing a Battery Storing a Battery Battery Performance NOTE: Batteries for portable computers are covered only during the initial 1-year period of the limited warranty for your computer. For more information about the Dell warranty for your computer, see the System Information Guide.
In addition, when your computer is connected to a docking device (docked), the Battery Meter screen includes a Dock Battery tab, which displays the charge level and current status of the docking device battery. The following icons appear in the Battery Meter screen: l l l l l l The computer or docking device is running on battery power. The battery is discharging or idle. The computer or docking device is connected to an electrical outlet and running on AC power. The battery is charging.
For more information about removing the second battery, see "Using the Module Bay." CAUTION: Before performing these procedures, turn off the computer, disconnect it from the electrical outlet, and disconnect the modem from the telephone wall jack. NOTICE: If you choose to replace the battery with the computer in standby mode, you have up to 90 seconds to complete the battery replacement before the computer shuts down and loses any unsaved data. 1.
Back to Contents Page Using the Module Bay Dell Precision™ M60 Series Mobile Workstation User's Guide About the Module Bay Checking the Charge on the Second Battery Removing and Installing Devices While the Computer Is Turned Off Removing and Installing Devices While the Computer Is Running Using the CD or DVD Tray About the Module Bay You can install devices such as a floppy drive, CD drive, CD-RW drive, DVD drive, CD-RW/DVD drive, DVD+RW, Dell TravelLite™ module, second battery, or second hard drive in
NOTE: You do not need to install the device screw unless you want to secure the module inside the computer for security purposes. If the Device Screw Is Not Installed NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. 1. 1 Press the device latch release. device latch release 2. Pull the device out of the module bay. 3.
1 device latch release 6. Pull the device out of the module bay. NOTICE: Insert devices into the module bay before you dock and turn on the computer. 7. Insert the new device into the bay, and push the device until you feel a click. 8. Replace the device screw. 9. Turn on the computer. Removing and Installing Devices While the Computer Is Running NOTE: If the device screw is not installed, you can remove and install devices while the computer is running and connected to a docking device (docked).
3. 1 Press the device latch release. device latch release 4. Pull the device out of the module bay. 5. Insert the new device into the bay, and push the device until you feel a click. Windows XP automatically recognizes the new device. 6. If necessary, enter your password to unlock your computer. Windows 2000 1. Click the Unplug or Eject Hardware icon on the taskbar. 2. Click the device you want to eject and click Stop. 3. Press the device latch release.
1 device latch release 4. Pull the device out of the bay. 5. Insert the new device into the bay, and push the device until you feel a click. 6. When the operating system recognizes the new device, click Close. If the Device Screw Is Installed Windows XP 1. Double-click the Safely Remove Hardware icon on the taskbar. 2. Click the device you want to eject. 3. If the computer is connected to a docking device (docked), undock it.
7. Insert the new device into the bay, push the device until you feel a click, and replace the screw. Windows XP automatically recognizes the new device. 8. If necessary, enter your password to unlock your computer. Windows 2000 1. Click the Unplug or Eject Hardware icon on the taskbar. 2. Click the device you want to eject and click Stop. 3. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer. 4. Press the device latch release. 1 device latch release 5.
7. When the operating system recognizes the new device, click Close. Using the CD or DVD Tray NOTICE: Do not press down on the drive tray when opening or closing it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer while playing CDs or DVDs. 1. Press the eject button on the front of the drive. 2. Pull the tray out. 3. Place the disc, label side up, in the center of the tray. 4. Snap the disc onto the spindle. 1 eject button 5.
1 volume icon 2 Volume Meter 3 mute icon NOTE: By default, the Volume Meter appears in the lower-right corner of the display. You can click and drag the meter to a new location, and the meter subsequently always appears at the new location. When the meter is enabled, adjust the volume using the volume control buttons or by pressing the following keys: l Press to increase volume. l Press to decrease volume. l Press to mute volume.
Back to Contents Page Cleaning Your Computer Dell Precision™ M60 Series Mobile Workstation User's Guide 1. 2. 3. Shut down the computer through the Start menu. Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off now. Remove any installed batteries and disconnect the AC adapter.
2. With a soft, lint-free cloth, gently wipe the bottom of the disc (the unlabeled side) in a straight line from the center to the outer edge of the disc. For stubborn dirt, try using water or a diluted solution of water and mild soap. You can also purchase commercial products that clean discs and provide some protection from dust, fingerprints, and scratches. Cleaning products for CDs are safe to use on DVDs. 3. Close the computer cover. 4. xxAttach the computer stand (optional).
Back to Contents Page Using the Dell Diagnostics Dell Precision™ M60 Series Mobile Workstation User's Guide When to Use the Dell Diagnostics Features of the Dell Diagnostics Starting the Dell Diagnostics When to Use the Dell Diagnostics Whenever a major component or device in your computer does not function properly, you may have a component failure.
l If a component failure is detected, the computer stops and beeps. To stop the assessment and reboot to the operating system, press continue to the next test, press ; to retest the component that failed, press ; to . l If failures are detected during the Pre-boot System Assessment, write down the error code(s) and contact Dell before continuing on to the Dell Diagnostics.
Back to Contents Page Using the Display Dell Precision™ M60 Series Mobile Workstation User's Guide Adjusting Brightness Switching the Video Image Setting Display Resolution Adjusting Brightness When the Dell™ computer is running on battery power, you can conserve power by setting the brightness to the lowest comfortable setting using the appropriate keyboard shortcuts for the display. The Dell QuickSet Brightness Meter shows the current brightness setting for the display.
2. Under Pick a category, click Appearance and Themes. 3. Under Pick a task..., click the area you want to change, or under the Control Panel icon, click Display. 4. Try different settings for Color quality and Screen resolution. Windows 2000 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click the Display icon and click the Settings tab. 3. Try different settings for Colors and Screen area.
Back to Contents Page Reinstalling Software Dell Precision™ M60 Series Mobile Workstation User's Guide Reinstalling Drivers and Utilities Resolving Software and Hardware Incompatibilities Using Microsoft® Windows® System Restore Reinstalling Microsoft® Windows® XP Reinstalling Windows 2000 Reinstalling Drivers and Utilities Dell ships your computer to you with required drivers and utilities already installed—no further installation or configuration is needed.
11. Click Finish and restart your computer. Using the Windows XP Device Driver Rollback If you install a new device driver that causes system instability, you can use the Windows XP Device Driver Rollback to replace the new device driver with the previously installed version of the device driver.
Troubleshooter list, click I need to resolve a hardware conflict on my computer and click Next. Windows 2000 1. Click the Start button, point to Settings, and then click Control Panel. 2. Double-click the System icon. 3. Click the Hardware tab. 4. Click Device Manager. 5. Click View and click Resources by connection. 6. Double-click Interrupt request (IRQ) to view the IRQ assignments.
4. Type a name for the new restore point in the Restore point description field. The present date and time are automatically added to the description of the new restore point. 5. Click Create. 6. Click OK. Restoring the Computer to an Earlier Operating State If problems occur after installing a device driver, first try using Device Driver Rollback. If Device Driver Rollback does not resolve the problem, then use System Restore.
NOTICE: The Operating System CD provides options for reinstalling Windows XP. The options can overwrite files and possibly affect programs installed on your hard drive. Therefore, do not reinstall Windows XP unless instructed to do so by a Dell technical support representative. NOTICE: To prevent conflicts with Windows XP, disable any virus protection software installed on your computer before you reinstall Windows XP. See the documentation that came with the software for instructions.
1. Reinstall the appropriate drivers. 2. Reinstall your virus protection software. See the documentation that came with the software for instructions. 3. Reinstall your other software programs. See the documentation that came with the software for instructions. Reinstalling Windows 2000 NOTICE: The Operating System CD provides options for reinstalling the Windows 2000 operating system.
Back to Contents Page Finding Information Dell Precision™ M60 Series Mobile Workstation User's Guide Safety Instructions Documentation Updates Using Microsoft® Windows® Using Devices Using the Dell™ Drivers and Utilities CD Fixing Problems Installing Parts Safety Instructions CAUTION: For precautions on safely handling and using your computer and preventing electrostatic discharge, see the safety instructions in the System Information Guide.
Microsoft Windows Guide For more information on troubleshooting problems, see the Windows documentation that came with your computer. Dell Support For personalized online support, driver updates, and instant answers to your questions, access Dell Support at support.dell.com. Installing Parts For help with adding parts to your computer, see "Adding and Replacing Parts.
Back to Contents Page Getting Help Dell Precision™ M60 Series Mobile Workstation User's Guide Technical Assistance Problems With Your Order Product Information Returning Items for Warranty Repair or Credit Before You Call Contacting Dell Technical Assistance If you need help with a technical problem, Dell is ready to assist you. CAUTION: If you need to remove the computer covers, first disconnect the computer power and modem cables from all electrical outlets. 1.
l Electronic Information Service info@dell.com AutoTech Service Dell's automated technical support service—AutoTech—provides recorded answers to the questions most frequently asked by Dell customers about their portable and desktop computers. When you call AutoTech, use your touch-tone telephone to select the subjects that correspond to your questions. The AutoTech service is available 24 hours a day, 7 days a week. You can also access this service through the technical support service.
Name: Date: Address: Phone number: Service tag (bar code on the back of the computer): Express Service Code: Return Material Authorization Number (if provided by Dell support technician): Operating system and version: Devices: Expansion cards: Are you connected to a network? Yes No Network, version, and network adapter: Programs and versions: See your operating system documentation to determine the contents of the system's start-up files. If the computer is connected to a printer, print each file.
Home/Small Business Technical Support Preferred Accounts/Corporate Technical Support Switchboard 01 795 67604 0660 8779 01 491 04 0 Bahamas General Support toll-free: 1-866-278-6818 Barbados General Support 1-800-534-3066 Belgium (Brussels) Website: support.euro.dell.com International Access Code: 00 Country Code: 32 E-mail: tech_be@dell.com E-mail for French Speaking Customers: support.euro.dell.
Costa Rica General Support Czech Republic (Prague) Website: support.euro.dell.com International Access Code: 00 0800-012-0435 E-mail: czech_dell@dell.com Technical Support 02 22 83 27 27 Country Code: 420 Customer Care 02 22 83 27 11 City Code: 2 Fax 02 22 83 27 14 TechFax 02 22 83 27 28 Switchboard 02 22 83 27 11 Denmark (Copenhagen) International Access Code: 00 Website: support.euro.dell.com E-mail Support (portable computers): den_nbk_support@dell.
Guyana General Support Hong Kong Technical Support (Dimension™ and Inspiron™) International Access Code: 001 Country Code: 852 India Ireland (Cherrywood) International Access Code: 16 Technical Support (OptiPlex™, Latitude™, and Dell Precision™) Customer Service (non-technical, post-sales issues) 296 93191 800 93 8291 toll-free: 800 96 4109 Large Corporate Accounts HK toll-free: 800 96 4108 Large Corporate Accounts GCP HK toll-free: 800 90 3708 Technical Support 1600 33 8045 Sales 1600 33 80
Latin America Customer Technical Support (Austin, Texas, U.S.A.) 512 728-4093 Customer Service (Austin, Texas, U.S.A.) 512 728-3619 Fax (Technical Support and Customer Service) (Austin, Texas, U.S.A.) 512 728-3883 Sales (Austin, Texas, U.S.A.) 512 728-4397 SalesFax (Austin, Texas, U.S.A.) 512 728-4600 or 512 728-3772 Luxembourg International Access Code: 00 Website: support.euro.dell.com E-mail: tech_be@dell.
Sales Fax Nicaragua General Support Norway (Lysaker) Website: support.euro.dell.com International Access Code: 00 Country Code: 47 0800 441 567 0800 441 566 001-800-220-1006 E-mail Support (portable computers): nor_nbk_support@dell.com E-mail Support (desktop computers): nor_support@dell.com E-mail Support (servers): nordic_server_support@dell.
Technical Support Customer Care Sweden (Upplands Vasby) International Access Code: 00 Country Code: 46 902 100 130 902 118 546 Switchboard 91 722 92 00 Fax 91 722 95 83 Website: support.euro.dell.com E-mail: swe_support@dell.com E-mail Support for Latitude and Inspiron: Swe-nbk_kats@dell.com E-mail Support for OptiPlex: Swe_kats@dell.com City Code: 8 E-mail Support for Servers: Nordic_server_support@dell.
Customer Service DellNet™ Service and Support toll-free: 1-800-624-9897 toll-free: 1-877-Dellnet (1-877-335-5638) Employee Purchase Program (EPP) Customers toll-free: 1-800-695-8133 Financial Services website: www.dellfinancialservices.
Back to Contents Page Glossary Dell Precision™ M60 Series Mobile Workstation User's Guide A B C D E G H I K L M N O P R S T U V W X Z Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. A AC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable into an electrical outlet.
L2 cache — Secondary cache which can either be external to the microprocessor or incorporated into the microprocessor architecture. carnet — An international customs document that facilitates temporary imports into foreign countries. Also known as a merchandise passport. CD — compact disc — An optical form of storage media, typically used for audio and software programs. CD drive — A drive that uses optical technology to read data from CDs. CD player — The software used to play music CDs.
DVI — digital video interface — A standard for digital transmission between a computer and a digital video display; the DVI adapter works through the computer's integrated graphics. E ECC — error checking and correction — A type of memory that includes special circuitry for testing the accuracy of data as it passes in and out of memory. ECP — extended capabilities port — A parallel connector design that provides improved bidirectional data transmission.
hibernate mode — A power management mode that saves everything in memory to a reserved space on the hard drive and then turns off the computer. When you restart the computer, the memory information that was saved to the hard drive is automatically restored. HTML — hypertext markup language — A set of codes inserted into an Internet web page intended for display on an Internet browser. HTTP — hypertext transfer protocol — A protocol for exchanging files between computers connected to the Internet.
MB/sec — megabytes per second — One million bytes per second. This measurement is typically used for data transfer ratings. memory — A temporary data storage area inside your computer. Because the data in memory is not permanent, it is recommended that you frequently save your files while you are working on them, and always save your files before you shut down the computer. Your computer can contain several different forms of memory, such as RAM, ROM, and video memory.
POST — power-on self-test — Diagnostics programs, loaded automatically by the BIOS, that perform basic tests on the major computer components, such as memory, hard drives, and video. If no problems are detected during POST, the computer continues the start-up. program — Any software that processes data for you, including spreadsheet, word processor, database, and game packages. Programs require an operating system to run.
S/PDIF — Sony/Philips Digital Interface — An audio transfer file format that allows the transfer of audio from one file to another without converting it to and from an analog format, which could degrade the quality of the file. standby mode — A power management mode that shuts down all unnecessary computer operations to save energy. surge protectors — Prevent voltage spikes, such as those that may occur during an electrical storm, from entering the computer through the electrical outlet.
infected, the boot virus may replicate itself onto all the floppy disks that are read or written in that computer until the virus is eradicated. V — volt — The measurement of electric potential or electromotive force. One V appears across a resistance of 1 ohm when a current of 1 ampere flows through that resistance. W W — watt — The measurement of electrical power. One W is 1 ampere of current flowing at 1 volt.
Back to Contents Page Using the Keyboard and Touch Pad Dell Precision™ M60 Series Mobile Workstation User's Guide Numeric Keypad Keyboard Shortcuts Touch Pad Customizing the Touch Pad and Track Stick Numeric Keypad The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, ensure that the keypad is enabled and press and the desired key. The light indicates that the keypad is active.
Display Functions Switches the video image to the next display in the following sequence: the integrated display only, the integrated display and an external CRT monitor simultaneously, an external CRT monitor only, the integrated display and an external DVI monitor simultaneously, external DVI monitor only, and external CRT monitor and external DVI monitor simultaneously. Increases brightness on the integrated display only (not on an external monitor).
Opens the System Properties dialog box To adjust keyboard operation, such as the character repeat rate, open the Control Panel, and click Printers and Other Hardware (Windows XP) or double-click the Keyboard icon (Windows 2000). Touch Pad The touch pad detects the pressure and movement of your finger to allow you to move the cursor on the display. Use the touch pad and touch pad buttons as you would use a mouse.
Your computer came with an additional track stick cap. You can purchase additional caps by visiting the Dell website at www.dell.com. You may need to change the track stick cap if it wears down from prolonged use. 1. Pull the cap off the track stick. 2. Align the new cap over the square track-stick post and gently press the cap down onto the post. 3. Test the track stick to ensure that the cap is seated properly.
Back to Contents Page Passwords Dell Precision™ M60 Series Mobile Workstation User's Guide About Passwords Using a Primary Password Using an Administrator Password Using a Hard Drive Password Assigning an Asset Tag About Passwords NOTE: Passwords are disabled when you receive your computer. A primary password prevents unauthorized access to the computer at start-up. You can use an administrator password instead of the primary password.
The administrator password can be used instead of the primary password. Whenever you are prompted to enter the primary password, you can enter the administrator password. NOTE: The administrator password provides access to the computer, but it does not provide access to the hard drive when a hard drive password is assigned.
c. 9. Press the arrow keys to select Diskette Drive and press . Type asset and a space followed by the new asset tag, and press For example, type the following command line and press . : asset 1234$ABCD& NOTE: An asset tag can have up to 10 characters; any combination of characters excluding spaces is valid. 10. When the computer prompts you to verify the asset tag, type y. The computer displays the new or modified asset tag and the service tag. 11.
/d Deletes the asset tag /o owner tag Specifies a new owner tag /o /d Deletes the owner tag /? Displays the Asset Tag utility help screen Back to Contents Page
Back to Contents Page Using PC Cards Dell Precision™ M60 Series Mobile Workstation User's Guide PC Card Types PC Card Blanks Extended PC Cards Installing a PC Card Removing a PC Card or Blank PC Card Types See "Specifications" for information on supported PC Cards. NOTE: A PC Card is not a bootable device. The PC Card slot has one connector that supports a single Type I or Type II card. The PC Card slot supports CardBus technology and extended PC Cards.
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the PC Card. Removing a PC Card or Blank NOTICE: Use the PC Card configuration utility on the taskbar to select a card and stop it from functioning before you remove it from the computer. If you do not stop the card in the configuration utility, you could lose data.
Back to Contents Page Power Management Dell Precision™ M60 Series Mobile Workstation User's Guide Power Management Tips Power Management Wizard Power Management Modes Power Options Properties Power Management Tips NOTE: See "Using a Battery" for more information on conserving battery power. l Connect the computer to an electrical outlet when possible because battery life is largely determined by the number of times the battery is charged.
¡ Prompt a user for an action (Ask me what to do). Selecting a Power Scheme NOTE: When your computer is running on battery power, the Network Disabled power scheme disables your internal network and wireless activity. When your computer is connected to an electrical outlet or docking device, the Network Disabled power scheme disables only your wireless activity. You must set the power scheme through QuickSet (not Microsoft® Windows®) for Network Disabled to work.
To exit standby mode, press the power button or open the display depending on how you set the options on the Advanced tab. You cannot make the computer exit standby mode by pressing a key or touching the touch pad or track stick. Hibernate Mode Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then completely turning off the computer. When the computer exits hibernate mode, it returns to the same operating state it was in before entering hibernate mode.
¡ Enter hibernate mode. ¡ Shut down Windows and turn off the computer. ¡ Choose no action (None or Do nothing). To program these functions, click an option from the corresponding drop-down menu and then click OK. Hibernate Tab The Hibernate tab lets you enable hibernate mode by clicking the Enable hibernate support check box. Intel® SpeedStep™ Technology Tab NOTE: Windows XP controls the performance level of the processor depending on the power scheme that you select. See "Power Schemes Tab.
Back to Contents Page Solving Problems Dell Precision™ M60 Series Mobile Workstation User's Guide Power Problems Error Messages Video and Display Problems Sound and Speaker Problems Printer Problems Modem and Internet Connection Problems Touch Pad or Mouse Problems External Keyboard Problems Unexpected Characters Drive Problems PC Card Problems Smart Card Problems Network Problems General Program Problems If Your Dell™ Computer Gets Wet If You Drop or Damage Your Computer Resolving Other Technical Problems
Ensuring Sufficient Power for Your Computer Your computer is designed to use the 90-W AC adapter; for optimum system performance, you should always use this adapter. The 65-W AC adapters used in other Dell™ portable computers can be used with your computer, but they will decrease system performance. Using less powerful AC adapters, including the 65-W AC adapter, will cause you to receive a WARNING message.
Hard-disk drive controller failure 0 — The hard drive does not respond to commands from the computer. Shut down the computer, remove the hard drive, and boot the computer from a CD. Then shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard-Disk Drive tests as described in "Using the Dell Diagnostics." Hard-disk drive failure — The hard drive does not respond to commands from the computer.
A required .DLL file was not found — The program that you are trying to open is missing an essential file. Remove and then reinstall the program. Microsoft® Windows® XP 1. 2. 3. 4. 5. Click the Start button and click Control Panel. Click Add or Remove Programs. Select the program you want to remove. Click Remove or Change/Remove and follow the prompts on the screen. See the program documentation for installation instructions. Windows 2000 1. 2. 3. 4. 5.
Test the electrical outlet — Ensure that the electrical outlet is working by testing it with another device, such as a lamp. Check the AC adapter — Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on. Connect the computer directly to an electrical outlet — Bypass power protection devices, power strips, and the extension cable to verify that the computer turns on.
If you have a problem with integrated speakers Adjust the Windows volume control — Double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted. Adjust the volume, bass, or treble controls to eliminate distortion. Adjust the volume using keyboard shortcuts — See "Using the Keyboard and Touch Pad." Press the integrated speakers. to disable (mute) or reenable Reinstall the sound (audio) driver — See "Reinstalling Software.
6. 7. 8. Double-click the name of the drive. On the drive Properties screen, click the Properties tab. Click the box near the bottom of the screen to enable digital audio for your CD or DVD drive. Printer Problems Fill out the Diagnostics Checklist as you perform the various checks. Check the printer cable connections — Ensure that the printer cable is properly connected to the computer. Check the printer cable — 1. 2. 3. 4. Shut down the computer and turn off the printer.
Check the telephone wall jack — Disconnect the telephone line from the modem and connect it to a telephone. Listen for a dial tone. Ensure that you have touchtone telephone service. Try connecting the modem to a different telephone wall jack. Slow connection speeds can be caused by telephone noise as well as by telephone line or network conditions. Contact your telephone company or network administrator for more information.
Windows XP 1. 2. 3. Click the Start button, click Control Panel, and then click Printers and Other Hardware. Click Mouse. Try adjusting the settings. Windows 2000 1. 2. 3. Click the Start button, point to Settings, and then click Control Panel. Double-click the Mouse icon. Try adjusting the settings. Check the mouse cable — Shut down the computer. Disconnect the mouse cable, check it for damage, and firmly reconnect the cable.
Unexpected Characters Disable the numeric keypad — Press numbers lock light is not lit. to disable the numeric keypad if numbers are displayed instead of letters. Verify that the Drive Problems Fill out the Diagnostics Checklist as you complete these checks. If you cannot play a CD, CD-RW, DVD, or DVD+RW NOTE: Because of different worldwide file types, not all DVD titles work in all DVD drives. High-speed CD drive vibration is normal and may cause noise.
Disable standby or hibernate mode in Windows before writing to a CD-RW — Search for the keyword standby or hibernate in Windows Help or the Windows Help and Support Center. Change the write speed to a slower rate — See the help files for your CD or DVD creation software. Exit all other open programs — Exiting all other open programs before writing to the CD-RW or DVD+RW may alleviate the problem.
Network Problems Fill out the Diagnostics Checklist as you complete these checks. Check the network cable connector — Ensure that the network cable connector is firmly connected to the connector on the computer and the network wall jack. Check the network lights on the network connector — Green indicates that the network connection is active. If the status light is not green, try replacing the network cable. Amber indicates that the network adapter driver is loaded and the adapter is detecting activity.
Confirm that the problem is software-related — Run the System Board Devices tests in the Dell Diagnostics. If all tests in the device group run successfully, the problem may be software-related. See the software documentation. If Your Dell™ Computer Gets Wet CAUTION: Perform this procedure only after you are certain that it is safe to do so.
E-mail Dell — Go to support.dell.com and then click E-Mail Dell in the Communicate list. Send an e-mail message to Dell about your problem; you can expect to receive an e-mail message from Dell within hours. See "Getting Help" for a description of the hardware and software support provided by Dell. Contact Dell — If you cannot solve your problem using the Dell Support website (support.dell.com) or e-mail service, call Dell for technical assistance.
Back to Contents Page Dell™ QuickSet Features Dell Precision™ M60 Series Mobile Workstation User's Guide Clicking the QuickSet Icon Double-Clicking the QuickSet Icon Right-Clicking the QuickSet Icon Dell™ QuickSet runs from the icon located in the taskbar and functions differently when you click, double-click, or right-click the icon. Clicking the QuickSet Icon Click the icon to perform the following tasks: l Adjust power management settings using the Power Management Wizard.
Back to Contents Page Adding and Replacing Parts Dell Precision™ M60 Series Mobile Workstation User's Guide Adding Memory Adding a Mini PCI Card Adding a Modem Replacing the Hard Drive Replacing the Bluetooth™ Card Connecting a Television to the Computer Adding Memory You can increase your computer memory by installing memory modules on the system board. See "Specifications" for information on the memory supported by your computer. Install only memory modules that are intended for your computer.
1 securing clips (2 per connector) 2 memory module NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled "DIMM A" before you install a module in the connector labeled "DIMM B." Insert memory modules at a 45-degree angle to avoid damaging the connector. 9. Ground yourself and install the new memory module: a. b. Align the notch in the module edge connector with the tab in the connector slot.
1 captive screw 2 memory module cover 11. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet. 12. Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information. To confirm the amount of memory installed in the computer: l In Windows XP, click the Start button, click Help and Support, and then click Computer Information.
1 captive screw 2 Mini PCI card/modem cover 9. If a Mini PCI card is not already installed, go to step 10. If you are replacing a Mini PCI card, remove the existing card: a. Disconnect the Mini PCI card from any attached cables. b. Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly. c. Lift the Mini PCI card out of its connector.
1 Mini PCI card 2 antenna cables (2) 12. Replace the cover and tighten the screw. Adding a Modem If you ordered the optional modem at the same time that you ordered your computer, Dell installed the modem for you. CAUTION: Before working inside your computer, read the safety instructions in your System Information Guide. NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts. 1.
9. If a modem is not already installed, go to step 10. If you are replacing a modem, remove the existing modem: a. Remove the screws securing the modem to the system board, and set it aside. b. Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board, and disconnect the modem cable. 1 modem cable 2 modem 3 pull-tab 4 screw 5 system board connector 10. Connect the modem cable to the modem.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure. 7. 1 Turn the computer over, and remove the hard drive screw. hard drive screw NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging.
1 Bluetooth card 2 system board connector 3 Bluetooth card connector 4 cable Connecting a Television to the Computer NOTE: Video and audio cables for connecting your computer to a television are not included with your computer. Cables may be purchased at most consumer electronics stores. Your computer has an S-video TV-out connector that, together with the included TV/digital audio adapter cable, enables you to connect the computer to a television and/or stereo audio device.
S-Video and Standard Audio Before you begin, ensure that you have the following cables: 1 TV/digital audio adapter cable 2 S-video cable 3 audio cable 1. Turn off the computer and the television and/or audio device you want to connect. NOTE: You can connect an S-video cable directly to the S-video connector on the computer (without the video adapter cable) if your television or audio device supports S-video but not S/PDIF digital audio. 2.
6. Plug the two RCA connectors on the other end of the audio cable in to the audio input connectors on your television or other audio device. 7. Turn on the television and any audio device you connected, and then turn on the computer. 8. See "Enabling the Display Settings for a Television" to ensure that the computer recognizes and works properly with the television.
4. Plug the other end of the S-video cable in to the S-video connector on the television. 5. Plug one end of the S/PDIF digital audio cable in to the digital audio connector on the TV/digital audio adapter cable. 6. Plug the other end of the S/PDIF digital audio cable in to the audio input connector on your television or other audio device.
4. Plug the other end of the composite video cable in to the composite video connector on the television. 5. Plug the single-connector end of the audio cable in to the headphone connector on the computer. 6. Plug the two RCA connectors on the other end of the audio cable in to the audio input connectors on your television or other audio device.
1. Turn off the computer and the television and/or audio device you want to connect. 2. Connect the TV/digital audio adapter cable to the S-video TV-out connector on the computer. 3. Plug one end of the composite video cable in to the composite video connector on the TV/digital audio adapter cable. 4. Plug the other end of the composite video cable in to the composite video connector on the television. 5.
2. Insert a DVD into the DVD drive. If the DVD begins playing, click the stop button. 3. Click the Properties (wrench) icon. 4. Click the Audio tab. 5. Click Enable S/PDIF output. 6. Click Apply. 7. Click OK. Enabling S/PDIF in the Windows Audio Driver NOTE: Enabling S/PDIF in Windows disables the sound from the headphone connector. 1. Double-click the speaker icon in the Windows notification area. 2. Click the Options menu and then click Advanced Controls. 3. Click Advanced. 4.
5. Click Close. 6. Click OK.
Back to Contents Page Using the System Setup Program Dell Precision™ M60 Series Mobile Workstation User's Guide Overview Viewing the System Setup Screens System Setup Screens Commonly Used Options Overview NOTE: Your operating system may automatically configure most of the options available in the system setup program, thus overriding options that you set through the system setup program. (An exception is the External Hot Key option, which you can disable or enable only through the system setup program.
l Diskette Drive l Modular bay HDD l Internal HDD l CD/DVD/CD-RW drive During the boot routine, the computer starts at the top of the list and scans each enabled device for the operating system start-up files. When the computer finds the files, it stops searching and starts the operating system. To control the boot devices, select (highlight) a device by pressing the list.
NOTE: If neither Fast IR nor Slow IR work, contact the infrared device manufacturer. After you enable the infrared sensor, you can use it to establish a link to an infrared device. To set up and use an infrared device, see the infrared device documentation and the Microsoft® Windows® Help and Support Center (Windows Help in Windows 2000).
Back to Contents Page Using Smart Cards Dell Precision™ M60 Series Mobile Workstation User's Guide About Smart Cards Installing a Smart Card About Smart Cards Smart cards are small portable credit-card shaped devices with internal integrated circuits. Smart cards come in two varieties: memory and microprocessor. Memory smart cards store data but cannot process information. Microprocessor smart cards can add, delete, and manipulate information in the card memory.
1 PC Card slot (top) 2 smart card slot (bottom) 3 smart card Back to Contents Page
Back to Contents Page Specifications Dell Precision™ M60 Series Mobile Workstation User's Guide Microprocessor Microprocessor type Intel® Centrino™ Mobile Technology or Intel Pentium® M L1 cache 8 KB (internal) L2 cache 1 MB (on die) External bus frequency 400 MHz System Information System chip set Intel 855PM Data bus width 64 bits DRAM bus width 64 bits Microprocessor address bus width 32 bits PC Card CardBus controller TI 7510 CardBus controller PC Card connector supports one Type I
supports composite video and S/PDIF) Mini PCI Type IIIA Mini PCI card slot Modem RJ-11 port Network adapter RJ-45 port IEEE 1394 4-pin serial connector Communications Modem: Type v.92 56K MDC Controller softmodem Interface internal AC'97 bus Network adapter 10/100/1000 Ethernet LAN on system board Wireless internal Mini PCI Wi-Fi (802.11b, 802.11b/g, or 802.
Layout QWERTY/AZERTY/Kanji Touch Pad X/Y position resolution (graphics table mode) 240 cpi Size: Width 64.88-mm (2.55-inch) sensor-active area Height 48.88-mm (1.92-inch) rectangle Track Stick X/Y position resolution (graphics table mode) 250 count/sec @ 100 gf Size protrudes 0.5 mm (0.02 inch) higher than surrounding keycaps Battery Type 9-cell "smart" lithium ion (72 WHr) Dimensions: Depth 222.8 mm (8.77 inches) Height 22.5 mm (0.89 inch) Width 67 mm (2.64 inches) Weight 0.48 kg (1.
Environmental Temperature range: Operating 0°to 35°C (32° to 95°F) Storage –40°to 65°C (–40° to 149°F) Relative humidity (maximum): Operating 10% to 90% (noncondensing) Storage 5% to 95% (noncondensing) Maximum vibration (using a random-vibration spectrum that simulates user environment): Operating 0.66 GRMS Storage 1.30 GRMS Maximum shock (measured with hard drive in headparked position and a 2-ms half-sine pulse): Operating 122 G Storage 163 G Altitude (maximum): Operating –15.
Back to Contents Page Traveling With Your Computer Dell Precision™ M60 Series Mobile Workstation User's Guide Identifying Your Computer Packing the Computer Travel Tips Identifying Your Computer l Attach a name tag or business card to the computer, or use a permanent marker or stencil to write a unique identifying mark (such as your driver's license number) on the computer. l Write down your service tag and store it in a safe place away from the computer or carrying case.
NOTICE: Do not walk the computer through a metal detector. Send the computer through an X- ray machine or have it hand inspected. l Before you use the computer on an airplane, verify that such usage is permitted. Some airlines forbid the use of electronic devices during the flight. All airlines forbid the use of electronic devices during takeoff and landing. If Your Computer Is Lost or Stolen l Call a law enforcement agency to report the lost or stolen computer.
Back to Contents Page Using Microsoft® Windows® XP Dell Precision™ M60 Series Mobile Workstation User's Guide Help and Support Center Switching to Classic View Desktop Cleanup Wizard User Accounts and Fast User Switching Files and Settings Transfer Wizard Program Compatibility Wizard Home and Small Office Networking Internet Connection Firewall Help and Support Center The Help and Support Center provides help with the Windows XP operating system and other support and educational tools.
3. Click Clean Desktop Now. 4. When the Desktop Cleanup Wizard appears, click Next. 5. In the list of shortcuts, deselect any shortcuts you want to leave on the desktop and then click Next. 6. Click Finish to remove the shortcuts and close the wizard. User Accounts and Fast User Switching NOTE: Account options for Windows XP Home Edition differ from those available for Windows XP Professional.
connection, between computers in a home or small office. For more information, see the Windows Help and Support Center. Internet Connection Firewall The Internet Connection Firewall provides basic protection from unauthorized access to the computer while the computer is connected to the Internet. The firewall is automatically enabled when you run the Network Setup Wizard.
