book.
book.book Page 2 Wednesday, August 13, 2008 12:12 PM Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Abbreviations and Acronyms For a complete list of abbreviations and acronyms, see "Glossary" on page 251.
book.book Page 3 Wednesday, August 13, 2008 12:12 PM Contents 1 Finding Information 2 About Your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Determining Your Computer’s Configuration Front View 23 . . . . . . . . . . . . . . . . . . . . . . . . 24 . . . . . . . . . . . . . . . . . . . . . . Right Side View 30 . . . . . . . . . . . . . . . . . . . . . . . . 31 . . . . . . . . . . . . . . . . . . . . . . . Setting Up Your Computer . . . . . . . . . . . .
book.book Page 4 Wednesday, August 13, 2008 12:12 PM Microsoft® Windows Vista® Power Meter . . . . 45 . . . . . . . 45 . . . . . . . . . . . . . . . . . . . 45 ® ® Microsoft Windows Power Meter Charge Gauge Low-Battery Warning . . . . . . . . . . . . . . . 46 Conserving Battery Power . . . . . . . . . . . . . . . 46 Power Management Modes . . . . . . . . . . . . . . . 47 . . . . . . . . . . . . . 47 . . . . . . . . . . . . . . . . . .
book.book Page 5 Wednesday, August 13, 2008 12:12 PM Touch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Using the Display . . . . . . . . . . . . . . . . . . 59 Adjusting Brightness . . . . . . . . . . . . . . . . . . 59 . . . . . . . . . . . . . . . . . . . . 59 Customizing the Touch Pad 6 Using a Projector Making Images and Text Look Bigger or Sharper . . . Microsoft® Windows® XP . . . . . . . . . . . . . Windows Vista® . . . . . . . . . . . . . . . . . .
book.book Page 6 Wednesday, August 13, 2008 12:12 PM Setting Up a New WLAN Using a Wireless Router and a Broadband Modem . . . . . . . . . . . . . . . . . 90 Connecting to a WLAN . . . . . . . . . . . . . . . 92 Mobile Broadband / Wireless Wide Area Network (WWAN) 94 What You Need to Establish a Mobile Broadband Network Connection . . . . . . . . . . . . . . . . . . . . . 95 Checking Your Dell Mobile Broadband Card . . . . . . . 96 . . . . . . . . . . . . 96 . . . . . . . . . . . . . . . . . . . .
book.book Page 7 Wednesday, August 13, 2008 12:12 PM Trusted Platform Module (TPM) . Enabling the TPM Feature . . . . . . . . . . . . 109 . . . . . . . . . . . . . 109 Security Management Software . . 110 . . . . 110 . . . . . . . . . . . . . . 111 Using the Security Management Software Computer Tracking Software If Your Computer Is Lost or Stolen Alert Standard Format (ASF) . . . . . . . . . . . 111 . . . . . . . . . . . . . . 112 11 Cleaning Your Computer . . . . . . . . . . . .
book.book Page 8 Wednesday, August 13, 2008 12:12 PM Memory Problems . . . . . . . . . . . . . . . . . 127 Network Problems . . . . . . . . . . . . . . . . . 127 Power Problems . . . . . . . . . . . . . . . . . . 128 Printer Problems . . . . . . . . . . . . . . . . . . 129 Scanner Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 . . . . . . . . . . . . . 131 Sound and Speaker Problems Touch Pad or Mouse Problems Video and Monitor Problems . . . . . . . . . . . .
book.book Page 9 Wednesday, August 13, 2008 12:12 PM Using Microsoft Windows System Restore 148 . . . . Using Dell™ PC Restore and Dell Factory Image Restore 150 Using the Operating System Media 15 Adding and Replacing Parts Before You Begin 155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recommended Tools . . . . . . . . . . . . . . . . Turning Off Your Computer . . . . . . . . . . . . . 155 155 155 . . . . . . 156 . . . . . . . . . . . . . . . . . . . . . . 158 . . . . . .
book.book Page 10 Wednesday, August 13, 2008 12:12 PM Removing the Display Assembly . . . . . . . . . . 176 Replacing the Display Assembly . . . . . . . . . . 179 . . . . . . . . . . . . . . . . . . . . . . 181 Display Bezel Removing the Display Bezel . . . . . . . . . . . . 182 Replacing the Display Bezel . . . . . . . . . . . . 185 . . . . . . . . . . . . . . . . . . . . . . 185 Display Panel Removing the Display Panel . . . . . . . . . . . . 186 Replacing the Display Panel . . . .
book.book Page 11 Wednesday, August 13, 2008 12:12 PM Removing the Processor Thermal-Cooling Assembly 200 Replacing the Processor Thermal-Cooling Assembly 201 Processor Module . . . . . . . . . . . . . . . . . . . . 202 Removing the Processor Module . . . . . . . . . 202 Replacing the Processor Module . . . . . . . . . 204 . . . . . . . .
book.book Page 12 Wednesday, August 13, 2008 12:12 PM 16 Dell™ QuickSet . . . . . . . . . . . . . . . . . . . 17 Traveling With Your Computer . Identifying Your Computer . 229 . . . . . . . . . . . . . . . . . . 229 . . . . . . . . . . . . . . . . . . . . . . . . 230 Traveling by Air 18 Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Obtaining Assistance . . . . . . . . . . . . . . . . . . Technical Support and Customer Service DellConnect .
book.book Page 13 Wednesday, August 13, 2008 12:12 PM 19 Specifications 20 Appendix . . . . . . . . . . . . . . . . . . . . 241 . . . . . . . . . . . . . . . . . . . . . . . . 249 Macrovision Product Notice . . . . . . . . . . . . . . 249 . . . . . . . . . . . . . . . . . 249 . . . . . . . . . . . . . . . . . . . . 249 FCC Notice (U.S. Only) . FCC Class B .
book.
book.book Page 15 Wednesday, August 13, 2008 12:12 PM Finding Information NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may not be available in certain countries. NOTE: Additional information may ship with your computer.
book.book Page 16 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here • A diagnostic program for my computer Drivers and Utilities Media • Drivers for my computer NOTE: The Drivers and Utilities media may • My device documentation be optional and may not ship with your computer. • Notebook System Software (NSS) Documentation and drivers are already installed on your computer.
book.book Page 17 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here • How to set up my computer Quick Reference Guide • How to care for my computer NOTE: This document may be optional and • Basic troubleshooting information may not ship with your computer. • How to run the Dell Diagnostics • Tools and utilities • How to set up a printer • How to open my computer NOTE: This document is available as a PDF at support.dell.com.
book.book Page 18 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here • Service Tag and Express Service Code Service Tag and Microsoft® Windows® License • Microsoft Windows License Label These labels are located on your computer. • Use the Service Tag to identify your computer when you use support.dell.com or contact support. • Enter the Express Service Code to direct your call when contacting support.
book.book Page 19 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here • Solutions — Troubleshooting hints and tips, articles from technicians, and online courses, frequently asked questions Dell Support Website — support.dell.com NOTE: Select your region or business segment to view the appropriate support site.
book.book Page 20 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here • Software upgrades and troubleshooting hints — Frequently asked questions, hot topics, and general health of your computing environment Dell Support Utility The Dell Support Utility is an automated upgrade and notification system installed on your computer. This support provides real-time health scans of your computing environment, software updates, and relevant self-support information.
book.book Page 21 Wednesday, August 13, 2008 12:12 PM What Are You Looking For? Find It Here The operating system is already installed on your computer. To reinstall your operating system, use the Operating System media. See "Restoring Your Operating System" on page 146. After you reinstall your operating system, use the Drivers and Utilities media to reinstall drivers for the devices that came with your computer. Your operating system product key label is located on your computer.
book.
book.book Page 23 Wednesday, August 13, 2008 12:12 PM About Your Computer Determining Your Computer’s Configuration Based on selections that you made when purchasing your computer, your computer has one of several different video controller configurations. To determine your computer’s video controller configuration: 1 Access the Windows Help and Support Center. For instructions, see "Windows Help and Support Center" on page 20.
book.book Page 24 Wednesday, August 13, 2008 12:12 PM Front View 1 2 3 4 14 5 13 6 12 7 11 10 8 9 1 display latches (2) 2 display latch release 3 display 4 power button 5 device status lights 6 biometric reader (optional) 7 touch pad 8 media control buttons 9 speakers (2) 10 touch pad buttons 11 touch-pad scroll zone 12 keyboard 13 battery conservation button 14 keyboard and wireless status lights DISPLAY LATCHES 24 — Keep the display closed.
book.book Page 25 Wednesday, August 13, 2008 12:12 PM DISPLAY LATCH RELEASE DISPLAY — Slide to release the display latches and open the display. — For more information about your display, see "Using the Display" on page 59. POWER BUTTON — Press to turn on the computer or to enter or exit a power management mode. For more information on power management modes, see "Power Management Modes" on page 47.
book.book Page 26 Wednesday, August 13, 2008 12:12 PM • Solid green: The battery is charging. • Flashing green: The battery is almost fully charged. • Off: The battery is adequately charged (or external power is not available to charge battery. If the computer is running on a battery, the light operates as follows: • Off: The battery is adequately charged (or the computer is turned off). • Flashing orange: The battery charge is low. • Solid orange: The battery charge is critically low.
book.book Page 27 Wednesday, August 13, 2008 12:12 PM Play the previous track. Play the next track. Stop. SPEAKERS — To adjust the volume of the integrated speakers, press the media control buttons or speaker-volume keyboard shortcuts. For more information, see "Speaker Functions" on page 55. TOUCH PAD BUTTONS — Touch pad buttons provide the same functionality as mouse buttons. KEYBOARD — The keyboard includes a numeric keypad as well as the Microsoft Windows logo key.
book.book Page 28 Wednesday, August 13, 2008 12:12 PM 9 Turns on when the numeric keypad is enabled. A Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled. Turns on when wireless networking is enabled. To quickly enable or disable wireless networking, press . Turns on when a card with Bluetooth® wireless technology is enabled.
book.book Page 29 Wednesday, August 13, 2008 12:12 PM Left Side View 1 2 3 4 5 1 security cable slot 2 air vent 3 USB connectors (2) 4 optical drive 5 optical-drive tray eject button SECURITY CABLE SLOT — Lets you attach a commercially available antitheft device to the computer. For more information, see "Security Cable Lock" on page 105. AIR VENT — The computer uses fan(s) to create airflow through the vent(s), which prevents the computer from overheating.
book.book Page 30 Wednesday, August 13, 2008 12:12 PM Right Side View 1 2 3 4 5 6 1 smart card slot 2 hard drive 3 ExpressCard slot 4 IEEE 1394 connector 5 5-in-1 media memory card reader 6 audio connectors (2) 7 air vent SMART CARD SLOT HARD DRIVE 7 — Supports one smart card. See "Smart Cards" on page 102. — Stores software and data. E X P R E S S C A R D S L O T — Supports one ExpressCard, such as a modem or network adapter.
book.book Page 31 Wednesday, August 13, 2008 12:12 PM AUDIO CONNECTORS Attach headphones or speakers to the Attach a microphone to the connector. connector. AIR VENT — The computer uses fan(s) to create airflow through the vent(s), which prevents the computer from overheating. CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment, such as a closed briefcase, while it is running.
book.book Page 32 Wednesday, August 13, 2008 12:12 PM 1 air vent 2 S-video TV-out connector 3 network (RJ-45) connector 4 modem (RJ-11) connector 5 USB connectors (2) 6 USB connectors (2) 7 Digital-Video Interface (DVI) connector 8 video (VGA) connector 9 AC adapter connector 10 air vent S - V I D E O T V- O U T C O N N E C T O R Connects your computer to a TV. Also connects digital audio capable devices using the TV/digital audio adapter cable.
book.book Page 33 Wednesday, August 13, 2008 12:12 PM MODEM CONNECTOR (RJ - 11 ) To use the internal modem, connect the telephone line to the modem connector. For additional information on using the modem, see the modem documentation supplied with your computer under the Windows Help and Support Center. To access the Help and Support Center, see "Windows Help and Support Center" on page 20. USB CONNECTORS Connect USB devices, such as a mouse, keyboard, or printer.
book.book Page 34 Wednesday, August 13, 2008 12:12 PM The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. For optimum performance, use only the AC adapter that came with your computer. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries.
book.book Page 35 Wednesday, August 13, 2008 12:12 PM Bottom View 1 2 3 4 5 12 6 11 7 10 9 8 1 battery charge/health gauge 2 battery-bay latch release 3 battery 4 strike zone 5 cover for optional internal card with Bluetooth® wireless technology 6 hard drive 7 air vent 8 mini-card/modem cover 9 docking-device connector 10 memory module cover 11 air vent 12 optical-drive locking screw BATTERY CHARGE GAUGE/HEALTH GAUGE — Provides information on the battery charge status.
book.book Page 36 Wednesday, August 13, 2008 12:12 PM Battery" on page 43. STRIKE-ZONE — Circular rubber pad between the mini-card cover and the battery. Protects the hard drive by acting as a dampening device when a computer experiences resonating shock or is dropped (whether the computer is on or off). BLUETOOTH® WIRELESS T E C H N O L O G Y — For more information, see the documentation that came with your card. To quickly enable or disable all wireless devices, press .
book.book Page 37 Wednesday, August 13, 2008 12:12 PM Setting Up Your Computer Transferring Information to a New Computer You can use your operating system "wizards" to help you transfer files and other data from one computer to another—for example, from an old computer to a new computer.
book.book Page 38 Wednesday, August 13, 2008 12:12 PM Running the Files and Settings Transfer Wizard Running the Files and Settings Transfer Wizard With the Operating System Media NOTE: This procedure requires the Operating System media. This media is optional and may not be included with certain computers. To prepare a new computer for the file transfer: 1 Open the Files and Settings Transfer Wizard: click Start→All Programs→ Accessories→System Tools→Files and Settings Transfer Wizard.
book.book Page 39 Wednesday, August 13, 2008 12:12 PM 2 On the Where are the files and settings? screen, select the method you chose for transferring your settings and files and click Next. The wizard reads the collected files and settings and applies them to your new computer. When all of the settings and files have been applied, the Finished screen appears. 3 Click Finished and restart the new computer.
book.book Page 40 Wednesday, August 13, 2008 12:12 PM 5 On the Which computer is this? screen, click Old Computer→Next. 6 On the Select a transfer method screen, click the transfer method you prefer. 7 On the What do you want to transfer? screen, select the items you want to transfer and click Next. After the information has been copied, the Completing the Collection Phase screen appears. 8 Click Finish.
book.
book.
book.book Page 43 Wednesday, August 13, 2008 12:12 PM Using a Battery Battery Performance NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate paper warranty document that shipped with your computer. For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable computer with the main battery installed at all times. One battery is supplied as standard equipment in the battery bay.
book.book Page 44 Wednesday, August 13, 2008 12:12 PM • Running the computer in maximum performance mode. See "Configuring Power Management Settings" on page 48 for information about accessing Windows Power Options Properties or Dell QuickSet, which you can use to configure power management settings. You can check the battery charge before you insert the battery into the computer. You can also set power management options to alert you when the battery charge is low.
book.book Page 45 Wednesday, August 13, 2008 12:12 PM Microsoft® Windows Vista® Power Meter The Windows Vista Power Meter indicates the remaining battery charge. To check the Power Meter, move your cursor over the Power icon in the Notification area to display the Power icon flyout. If the computer is connected to an electrical outlet, the Power icon flyout displays the (plugged in charging) message. Microsoft® Windows® Power Meter The Windows Power Meter indicates the remaining battery charge.
book.book Page 46 Wednesday, August 13, 2008 12:12 PM To check the battery health using the charge gauge, press and hold the status button on the battery charge gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than 80 percent of its original charge capacity remains. Each light represents incremental degradation. If five lights appear, less than 60 percent of the charge capacity remains, and you should consider replacing the battery.
book.book Page 47 Wednesday, August 13, 2008 12:12 PM NOTE: See "Configuring Power Management Settings" on page 48 for information on conserving battery power. Power Management Modes Standby and Sleep Mode Standby mode (sleep mode in Microsoft Windows Vista) conserves power by turning off the display and the hard drive after a predetermined period of inactivity (a time-out).
book.book Page 48 Wednesday, August 13, 2008 12:12 PM NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode. Your computer enters hibernate mode if the battery charge level becomes critically low. To manually enter hibernate mode in Windows XP, click the Start button, click Turn off computer, press and hold , and then click Hibernate.
book.book Page 49 Wednesday, August 13, 2008 12:12 PM Accessing Power Options Properties Windows XP Click the Start button, point to Control Panel→Performance and Maintenance, and then click Power Options Windows Vista • Click the Windows Vista Start button , then click the Windows Power icon in the Notification area to display the Power icon flyout window. • Select one of the following from the Select a Power Plan section.
book.book Page 50 Wednesday, August 13, 2008 12:12 PM For information about resolving problems with a battery, "Power Problems" on page 128. Removing the Battery CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not use a battery from other computers with your computer.
book.book Page 51 Wednesday, August 13, 2008 12:12 PM 1 1 battery-bay latch release 2 2 battery To replace the battery, follow the removal procedure in reverse order. Storing a Battery Remove the battery when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully before you use it. See "Charging the Battery" on page 49.
book.
book.book Page 53 Wednesday, August 13, 2008 12:12 PM Using the Keyboard Numeric Keypad The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of the keypad keys. To type a number or symbol, hold down and press the desired key. • To enable the keypad, press . The keypad is active. • To disable the keypad, press again.
book.book Page 54 Wednesday, August 13, 2008 12:12 PM Key Combinations System Functions Opens the Task Manager window. Battery Displays the Dell™ QuickSet Battery Meter. For more information about the Battery Meter, see "Dell™ QuickSet Battery Meter" on page 44. CD or DVD Tray Ejects the tray out of the drive (if Dell QuickSet is installed). For more information about Dell QuickSet, see "Dell™ QuickSet" on page 227.
book.book Page 55 Wednesday, August 13, 2008 12:12 PM Power Management Activates a power management mode. You can reprogram this keyboard shortcut to activate a different power management mode using the Advanced tab in the Power Options Properties window. See "Power Management Modes" on page 47. Puts the computer into hibernate mode (if you have used QuickSet to set up this keyboard shortcut). For more information, see "Dell™ QuickSet" on page 227.
book.book Page 56 Wednesday, August 13, 2008 12:12 PM Microsoft® Windows Vista® Logo Key Functions Windows logo key and Cycle through programs on the taskbar by using Windows Flip 3-D (only if using the Aero interface). CTRL+Windows logo key and Use the arrow keys to cycle through programs on the taskbar by using Windows Flip 3-D (only if using the Aero interface) Windows logo key and Bring all gadgets to the front and select Window Sidebar (if using Windows Sidebar).
book.book Page 57 Wednesday, August 13, 2008 12:12 PM 1 2 1 touch pad 2 touch pad buttons (3) • To move the cursor, lightly slide your finger over the touch pad. • To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left touch-pad button. • To select and move (or drag) an object, position the cursor on the object and tap twice on the touch pad.
book.book Page 58 Wednesday, August 13, 2008 12:12 PM Customizing the Touch Pad You can use the Mouse Properties window to disable the touch pad or adjust its settings. 1 Open the Control Panel, and then click Mouse. For information about the Control Panel, see the Windows Help and Support Center. To access the Help and Support Center, see "Windows Help and Support Center" on page 20. 2 In the Mouse Properties window, click the Touch Pad tab to adjust touch pad settings.
book.book Page 59 Wednesday, August 13, 2008 12:12 PM Using the Display Adjusting Brightness When a Dell™ computer is running on battery power, you can conserve power by setting the display brightness to the lowest comfortable setting by pressing and the up- or down-arrow key on the keyboard. NOTE: Brightness key combinations only affect the display on your portable computer, not monitors or projectors that you attach to your portable computer or docking device.
book.book Page 60 Wednesday, August 13, 2008 12:12 PM Making Images and Text Look Bigger or Sharper NOTE: If you change the display resolution from the current settings, the image may appear blurry or text may be hard to read if you change the resolution to one not supported by your computer and display. Before you change any of the display settings, make a note of the current settings so you can change back to the previous settings if you need to.
book.book Page 61 Wednesday, August 13, 2008 12:12 PM 3 In the Display Settings window, under Resolution, slide the slide bar to the left/right to decrease/increase the screen resolution. 4 Click How do I get the best display? for further instructions.
book.
book.book Page 63 Wednesday, August 13, 2008 12:12 PM Using Multimedia Playing CDs or DVDs NOTICE: Do not press down on the CD or DVD tray when you open or close it. Keep the tray closed when you are not using the drive. NOTICE: Do not move the computer while playing CDs or DVDs. 1 Press the eject button on the front of the drive. 2 Pull out the tray.
book.book Page 64 Wednesday, August 13, 2008 12:12 PM 3 Place the disc, label side up, in the center of the tray and snap the disc onto the spindle. NOTE: If you use a module that shipped with another computer, you need to install the drivers and software necessary to play DVDs or write data. For more information, see the Drivers and Utilities CD (the CD is optional and may not be available for your computer or in certain countries). 4 Push the tray back into the drive.
book.book Page 65 Wednesday, August 13, 2008 12:12 PM Continuously play the current title or chapter. Go to the previous title or chapter. Eject. For more information on playing CDs or DVDs, click Help on the CD or DVD player (if available). Copying CD, DVD, and Blu-ray Disc™ (BD) Media NOTE: Ensure that you observe all copyright laws when copying media. This section applies only to computers that have a DVD+/-RW drive or a BD-RE drive.
book.book Page 66 Wednesday, August 13, 2008 12:12 PM When prompted, insert a blank disc into the drive and click OK. • If you have two optical drives, select the drive into which you have inserted your source disc and click the Copy Disc button to continue. The computer copies the data from the source disc to the blank disc. Once you have finished copying the source disc, the disc that you have created automatically ejects.
book.
book.book Page 68 Wednesday, August 13, 2008 12:12 PM • Do not burn a blank CD-R or CD-RW to its maximum capacity; for example, do not copy a 650-MB file to a blank 650-MB CD. The CD-RW drive needs 1–2 MB of blank space to finalize the recording. • Use a blank CD-RW to practice CD recording until you are familiar with CD recording techniques. If you make a mistake, you can erase the data on the CD-RW and try again.
book.book Page 69 Wednesday, August 13, 2008 12:12 PM 1 volume icon 3 mute icon 2 Volume Meter When the meter is enabled, adjust the volume with the volume control buttons or by pressing the following keys: • Press to increase volume. • Press to decrease volume. • Press to mute volume. For more information about QuickSet, right-click the icon in the taskbar and click Help.
book.book Page 70 Wednesday, August 13, 2008 12:12 PM Connecting Your Computer to a TV or Audio Device NOTE: Video and audio cables for connecting your computer to a TV or other audio device may not be included with your computer. Cables and TV/digital audio adapter cables are available for purchase from Dell.
book.book Page 71 Wednesday, August 13, 2008 12:12 PM 1 2 3 4 5 6 1 S-video TV-out connector 2 component video adapter 3 S/PDIF digital audio connector 4 Pr (red) component video-output connector 5 Pb (blue) component video-output connector 6 Y (green) component video-output connector If you want to connect your computer to a TV or audio device, it is recommended that you connect video and audio cables to your computer in one of the following combinations.
book.book Page 72 Wednesday, August 13, 2008 12:12 PM S-Video and Standard Audio 1 2 1 audio connector 2 S-video TV-out connector 1 2 1 standard S-video cable 2 standard audio cable 1 Turn off the computer and the TV and/or audio device that you want to connect. NOTE: If your TV or audio device supports S-video but not S/PDIF digital audio, you can connect an S-video cable directly to the S-video TV-out connector on the computer (without the TV/digital audio adapter cable).
book.book Page 73 Wednesday, August 13, 2008 12:12 PM 4 Plug the single-connector end of the audio cable into the headphone connector on your computer. 5 Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your TV or other audio device. 6 Turn on the TV and any audio device that you connected (if applicable), and then turn on the computer.
book.book Page 74 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 composite video adapter 3 S/PDIF digital audio cable 2 S-video cable 1 Turn off the computer and the TV and/or the audio device that you want to connect. 2 Connect the composite video adapter to the S-video TV-out connector on your computer. 3 Plug one end of the S-video cable into the S-video output connector on the composite video adapter.
book.book Page 75 Wednesday, August 13, 2008 12:12 PM 1 1 2 composite video adapter 2 S/PDIF digital audio cable 6 Plug the other end of the S/PDIF digital audio cable into the audio input connector on your TV or audio device. 7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer. 8 See "Enabling the Display Settings for a TV" on page 85 to ensure that the computer recognizes and works properly with the TV.
book.book Page 76 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 composite video adapter 3 standard audio cable 2 composite video cable 1 Turn off the computer and the TV and/or audio device that you want to connect. 2 Connect the composite video adapter to the S-video TV-out connector on your computer. 3 Plug one end of the composite video cable into the composite videooutput connector on the composite video adapter.
book.book Page 77 Wednesday, August 13, 2008 12:12 PM 5 Plug the single-connector end of the audio cable into the headphone connector on the computer. 6 Plug the two RCA connectors on the other end of the audio cable in to the audio input connectors on your TV or other audio device. 7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer.
book.book Page 78 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 composite video adapter 3 standard audio cable 2 composite video cable 1 Turn off the computer and the TV and/or audio device that you want to connect. 2 Connect the composite video adapter to the S-video TV-out connector on the computer. 3 Plug one end of the composite video cable into the composite video-input connector on the composite video adapter.
book.book Page 79 Wednesday, August 13, 2008 12:12 PM 1 1 2 composite video adapter 2 S/PDIF digital audio cable 6 Plug the other end of the digital audio cable into the S/PDIF input connector on your TV or other audio device. 7 Turn on the TV, turn on any audio device that you connected (if applicable), and then turn on the computer. 8 See "Enabling the Display Settings for a TV" on page 85 to ensure that the computer recognizes and works properly with the TV.
book.book Page 80 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 component video adapter 3 standard audio cable 2 component video cable 1 Turn off the computer and the TV and/or audio device that you want to connect. 2 Connect the component video adapter to the S-video TV-out connector on your computer. 3 Plug all three ends of the component video cable into the component video-output connectors on the component video adapter.
book.book Page 81 Wednesday, August 13, 2008 12:12 PM 1 component video adapter 2 component video cable 4 Plug all three connectors from the other end of the component video cable into the component video-input connectors on the TV. Make sure that the red, green, and blue colors of the cable match the colors of the TV input connectors. 5 Plug the single-connector end of the audio cable into the headphone connector on the computer.
book.book Page 82 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 component video adapter 3 standard audio cable 2 component video cable 1 Turn off the computer and the TV and/or audio device that you want to connect. 2 Connect the component video adapter to the S-video TV-out connector on the computer. 3 Plug all three ends of the component video cable into the component video-output connectors on the component video adapter.
book.book Page 83 Wednesday, August 13, 2008 12:12 PM 1 component video adapter 3 component video cable 2 component video-output connector 4 Plug all three connectors from the other end of the component video cable into the component video-input connectors on the TV. Make sure that the red, green, and blue colors of the cable match the colors of the TV input connectors. 5 Plug one end of the S/PDIF digital audio cable into the S/PDIF audio connector on the component video adapter.
book.book Page 84 Wednesday, August 13, 2008 12:12 PM 5 Click the DVD Audio Setting icon. 6 Click the arrows beside the Speaker Configuration setting to scroll through the options, and select the SPDIF option. 7 Click the Back button once, and then click the Back button again to return to the main menu screen. Enabling S/PDIF in the Windows Audio Driver 1 Double-click the speaker icon in the Windows notification area. 2 Click the Options menu and then click Advanced Controls. 3 Click Advanced.
book.book Page 85 Wednesday, August 13, 2008 12:12 PM 9 Click the Back button once, and then click the Back button again to return to the main menu screen. Enabling the Display Settings for a TV NOTE: To ensure that the display options appear correctly, connect the TV to the computer before you enable the display settings. Microsoft Windows XP 1 Click the Start button, point to Settings, and then click Control Panel. 2 Double-click Display and click the Settings tab. 3 Click Advanced.
book.
book.book Page 87 Wednesday, August 13, 2008 12:12 PM Setting Up and Using Networks Setting up a computer network provides connectivity between your computer and the Internet, another computer, or a network. For example, with a network set up in a home or small office you can print to a shared printer, access drives and files on another computer, browse other networks, or access the Internet. You can set up a local area network (LAN) using a network or broadband modem cable or set up a wireless LAN (WLAN).
book.book Page 88 Wednesday, August 13, 2008 12:12 PM Setting Up a Network in the Microsoft® Windows® XP Operating System 1 Click Start→All Programs→Accessories→Communications→Network Setup Wizard→Next→Checklist for creating a network. NOTE: Selecting the connection method labeled This computer connects directly to the Internet enables the integrated firewall provided with Windows XP Service Pack 2 (SP2). 2 Complete the checklist.
book.book Page 89 Wednesday, August 13, 2008 12:12 PM Setting Up a Network in the Microsoft Windows Vista® Operating System 1 Click the Windows Vista Start button, Set up a connection or network. , and then click Connect To→ 2 Select an option under Choose a connection option. 3 Click Next, and then follow the instructions in the wizard.
book.book Page 90 Wednesday, August 13, 2008 12:12 PM Start Button and Connect To Option In Microsoft Windows XP, click Start→Connect To→Show all connections. NOTE: If your computer is set to the Classic Start menu option, click Start→ Settings→Network Connections to view your network connections. In Microsoft Windows Vista, click the Windows Vista Start button, then click Connect To→View network computers and devices.
book.book Page 91 Wednesday, August 13, 2008 12:12 PM 4 Shut down your computer and any other wireless-enabled computers in the vicinity through the Windows Vista Start button, , or menu. 5 Disconnect your broadband modem power cable from the electrical outlet. 6 Disconnect the network cable from the computer and the modem. 7 Disconnect the AC adapter cable from your wireless router to ensure that there is no power connected to the router.
book.book Page 92 Wednesday, August 13, 2008 12:12 PM Connecting to a WLAN NOTE: Before you connect to a WLAN, ensure that you have followed the instructions in "Wireless Local Area Network (WLAN)" on page 89. NOTE: The following networking instructions do not apply to internal cards with Bluetooth® wireless technology or cellular products. This section provides general procedures for connecting to a network using wireless technology. Specific network names and configuration details vary.
book.book Page 93 Wednesday, August 13, 2008 12:12 PM If the Choose a wireless network window states Click an item in the list below to connect to a wireless network in range or to get more information, the Windows XP operating system is managing the wireless network card. Windows Vista To determine which wireless configuration utility is managing your wireless network card in Windows Vista: 1 Click the Windows Vista Start button, , and then click Connect To→ Connect To→Manage wireless networks.
book.book Page 94 Wednesday, August 13, 2008 12:12 PM Enabling/Disabling the Wireless Network Card NOTE: If you are unable to connect to a wireless network, ensure that you have all the components for establishing a WLAN (see "What You Need to Establish a WLAN Connection" on page 89), and then verify that your wireless network card is enabled by pressing . You can turn your computer’s wireless networking function on and off by pressing the key combination.
book.book Page 95 Wednesday, August 13, 2008 12:12 PM What You Need to Establish a Mobile Broadband Network Connection NOTE: You can use a Mobile Broadband ExpressCard to establish a Mobile Broadband network connection. To set up a Mobile Broadband network connection, you need: • A Mobile Broadband ExpressCard NOTE: For instructions on using ExpressCards, see "Using Cards" on page 99.
book.book Page 96 Wednesday, August 13, 2008 12:12 PM NOTE: The Mobile Broadband card is listed under Modems. Connecting to a Mobile Broadband Network NOTE: These instructions only apply to Mobile Broadband ExpressCards. They do not apply to internal cards with wireless technology. NOTE: Before you connect to the Internet, you must activate Mobile Broadband service through your cellular service provider.
book.book Page 97 Wednesday, August 13, 2008 12:12 PM For more information, click Start→Control Panel→Security→Windows Firewall, or see "Windows Help and Support Center" on page 20.
book.
book.book Page 99 Wednesday, August 13, 2008 12:12 PM Using Cards ExpressCards ExpressCards provide additional memory, wired and wireless communications, multimedia and security features. ExpressCards support two form factors: • ExpressCard/34 (34 mm wide) • ExpressCard/54 (54 mm wide in an L-shape with a 34 mm connector) The 34 mm card fits into both the 34 mm and 54 mm card slots. The 54 mm card only fits into a 54 mm card slot.
book.book Page 100 Wednesday, August 13, 2008 12:12 PM ExpressCard Blanks Your computer shipped with a plastic blank installed in the ExpressCard slot. Blanks protect unused slots from dust and other particles. Save the blank for use when no ExpressCard is installed in the slot; blanks from other computers may not fit your computer. Remove the blank before installing an ExpressCard. To remove the blank, see "Removing an ExpressCard or Blank" on page 101.
book.book Page 101 Wednesday, August 13, 2008 12:12 PM 2 1 1 release button 2 ExpressCard The computer recognizes the ExpressCard and automatically loads the appropriate device driver. If the configuration program tells you to load the manufacturer's drivers, use the floppy disk or CD that came with the ExpressCard. Removing an ExpressCard or Blank CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
book.book Page 102 Wednesday, August 13, 2008 12:12 PM 2 1 1 release button 2 ExpressCard Smart Cards About Smart Cards Smart cards are portable credit-card shaped devices with internal integrated circuits. The top surface of the smart card usually contains an embedded processor under the gold contact pad. The combination of the small size and integrated circuits make smart cards valuable tools for security, data storage, and special programs.
book.book Page 103 Wednesday, August 13, 2008 12:12 PM Installing a Smart Card You can install a smart card in the computer while the computer is running. The computer automatically detects the card. To install a smart card: 1 Hold the card so that the gold contact pad is facing upward and pointing toward the smart card slot. 1 2 1 gold contact pad 2 smart card (top) 2 Slide the smart card into the smart card slot until the card is completely seated in its connector.
book.
book.book Page 105 Wednesday, August 13, 2008 12:12 PM Securing Your Computer Security Cable Lock NOTE: Your computer does not ship with a security cable lock. A security cable lock is a commercially available antitheft device. To use the lock, attach it to the security cable slot on your Dell™ computer. For more information, see the instructions included with the device. NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot on your computer.
book.book Page 106 Wednesday, August 13, 2008 12:12 PM Passwords About Passwords NOTE: Passwords are disabled when you receive your computer. A primary password, an administrator password, and a hard drive password all prevent unauthorized access to your computer in different ways. The following table identifies types and features of passwords available on your computer.
book.book Page 107 Wednesday, August 13, 2008 12:12 PM If you forget any of your passwords, contact Dell (see "Contacting Dell" on page 239). For your protection, Dell technical support staff will ask you for proof of your identity to ensure that only an authorized person can use the computer. Using a Primary Password The primary password allows you to protect the computer from unauthorized access. When you first start your computer, you must assign a primary password at the prompt.
book.book Page 108 Wednesday, August 13, 2008 12:12 PM NOTE: The administrator password provides access to the computer, but it does not provide access to the hard drive when a hard drive password is assigned. If you forget the primary password and do not have an administrator password assigned, or if you have both a primary and an administrator password assigned but forget them both, contact your system administrator or contact Dell. See "Contacting Dell" on page 239.
book.book Page 109 Wednesday, August 13, 2008 12:12 PM NOTE: The administrator password provides access to the computer, but it does not provide access to the hard drive when a hard drive password is assigned. Trusted Platform Module (TPM) NOTE: Computers shipping into China are not equipped with the TPM feature. NOTE: The TPM feature supports encryption only if the operating system supports TPM. For more information, see the TPM software documentation and the help files that came with the software.
book.book Page 110 Wednesday, August 13, 2008 12:12 PM d Once the process is complete, the computer either restarts automatically or prompts you to restart your computer.
book.book Page 111 Wednesday, August 13, 2008 12:12 PM Computer Tracking Software Computer tracking software may enable you to locate your computer if it is lost or stolen. The software is optional and may be purchased when you order your Dell™ computer, or you can contact your Dell sales representative for information about this security feature. NOTE: Computer tracking software may not be available in certain countries.
book.book Page 112 Wednesday, August 13, 2008 12:12 PM Alert Standard Format (ASF) Alert Standard Format (ASF) is a Distributed Management Task Force (DMTF) management standard that specifies "pre-operating system" or "operating system absent" alerting techniques. The standard is designed to generate an alert on potential security and fault conditions when the operating system is in a sleep state or the system is turned off.
book.book Page 113 Wednesday, August 13, 2008 12:12 PM Cleaning Your Computer CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Computer, Keyboard, and Monitor CAUTION: Before you clean your computer, disconnect the computer from the electrical outlet. Clean your computer with a soft cloth dampened with water. Do not use liquid or aerosol cleaners, which may contain flammable substances.
book.book Page 114 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid damaging the surface, do not wipe in a circular motion around the disc. 2 With a soft, lint-free cloth, gently wipe the bottom of the disc (the unlabeled side) in a straight line from the center to the outer edge of the disc. For stubborn dirt, try using water or a diluted solution of water and mild soap. You can also purchase commercial products that clean discs and provide some protection from dust, fingerprints, and scratches.
book.book Page 115 Wednesday, August 13, 2008 12:12 PM Troubleshooting Dell Diagnostics CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. When to Use the Dell Diagnostics If you experience a problem with your computer, perform the checks in Lockups and Software Problems (see "Lockups and Software Problems" on page 125 ) and run the Dell Diagnostics before you contact Dell for technical assistance.
book.book Page 116 Wednesday, August 13, 2008 12:12 PM 2 Turn on (or restart) your computer. 3 Start the Dell Diagnostics in one of the following two ways: NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again. – When the DELL™ logo appears, press immediately. Select Diagnostics from the boot menu and press .
book.book Page 117 Wednesday, August 13, 2008 12:12 PM NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in the system setup program. 3 When the boot device list appears, highlight CD/DVD/CD-RW and press . 4 Select the Boot from CD-ROM option from the menu that appears and press . 5 Type 1 to start the Resource CD menu and press to proceed.
book.book Page 118 Wednesday, August 13, 2008 12:12 PM Option Function (continued) Extended Test Performs a thorough check of devices in the system. This typically can take an hour or more. Custom Test Use to test a specific device or customize the tests to be run. Symptom Tree This option allows you to select tests based on a symptom of the problem you are having. This option lists the most common symptoms.
book.book Page 119 Wednesday, August 13, 2008 12:12 PM Tab Function (continued) Configuration Displays your hardware configuration for the selected device. The Dell Diagnostics obtains configuration information for all devices from system setup, memory, and various internal tests, and it displays the information in the device list in the left pane of the screen. The device list may not display the names of all the components installed on your computer or all devices attached to your computer.
book.book Page 120 Wednesday, August 13, 2008 12:12 PM Battery Problems CAUTION: There is a danger of a new battery exploding if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions. CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
book.book Page 121 Wednesday, August 13, 2008 12:12 PM Optical drive problems NOTE: High-speed optical drive vibration is normal and may cause noise, which does not indicate a defect in the drive or the media. NOTE: Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives. ADJUST THE WINDOWS VOLUME CONTROL C L I C K T H E S P E A K E R I C O N I N T H E L O W E R- R I G H T C O R N E R O F Y O U R S C R E E N .
book.book Page 122 Wednesday, August 13, 2008 12:12 PM 1 Click Start and click Computer. 2 Right-click Local Disk C:. 3 Click Properties→Tools→Check Now. The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. 4 Follow the instructions on the screen.
book.book Page 123 Wednesday, August 13, 2008 12:12 PM 2 Follow the instructions on the screen to identify and resolve modem problems. Modem Helper is not available on certain computers. Windows Vista: 1 Click Start →All Programs→Modem Diagnostic Tool. 2 Follow the instructions on the screen to identify and resolve modem problems. Modem diagnostics are not available on all computers.
book.book Page 124 Wednesday, August 13, 2008 12:12 PM 3 Click Uninstall. 4 See the program documentation for installation instructions. Windows Vista: 1 Click Start →Control Panel→Programs→Programs and Features. 2 Select the program you want to remove. 3 Click Uninstall. 4 See the program documentation for installation instructions. drive letter : \ I S N O T A C C E S S I B L E . T H E D E V I C E I S N O T R E A D Y — The drive cannot read the disk. Insert a disk into the drive and try again.
book.book Page 125 Wednesday, August 13, 2008 12:12 PM If your IEEE 1394 device is listed, Windows recognizes the device. I F Y O U H A V E P R O B L E M S W I T H A D E L L IEEE 1394 D E V I C E — Contact Dell (see "Contacting Dell" on page 239). I F Y O U H A V E P R O B L E M S W I T H A N IEEE 1394 D E V I C E N O T P R O V I D E D B Y D E L L — Contact the IEEE 1394 device manufacturer.
book.book Page 126 Wednesday, August 13, 2008 12:12 PM A program is designed for an earlier Windows operating system RUN THE PROGRAM COMPATIBILITY WIZARD Windows XP: The Program Compatibility Wizard configures a program so that it runs in an environment similar to non-XP operating system environments. 1 Click Start→All Programs→Accessories→Program Compatibility Wizard→Next. 2 Follow the instructions on the screen.
book.book Page 127 Wednesday, August 13, 2008 12:12 PM COMPUTER THROUGH THE START MENU Memory Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. IF YOU RECEIVE AN INSUFFICIENT MEMORY MESSAGE — • Save and close any open files and exit any open programs you are not using to see if that resolves the problem. • See the software documentation for minimum memory requirements.
book.book Page 128 Wednesday, August 13, 2008 12:12 PM R U N T H E H A R D W A R E TR O U B L E S H O O T E R — See "Troubleshooting Software and Hardware Problems" on page 145. Power Problems . CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. I F T H E P O W E R L I G H T I S B L I N K I N G G R E E N — The computer is in standby mode.
book.book Page 129 Wednesday, August 13, 2008 12:12 PM Printer Problems CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTE: If you need technical assistance for your printer, contact the printer’s manufacturer. C H E C K T H E P R I N T E R D O C U M E N T A T I O N — See the printer documentation for setup and troubleshooting information.
book.book Page 130 Wednesday, August 13, 2008 12:12 PM C H E C K T H E S C A N N E R D O C U M E N T A T I O N — See the scanner documentation for setup and troubleshooting information. U N L O C K T H E S C A N N E R — Ensure that your scanner is unlocked (if the scanner has a locking tab or button). RESTART THE COMPUTER AND TRY THE SCANNER AGAIN CHECK THE CABLE CONNECTIONS • See the scanner documentation for information on cable connections.
book.book Page 131 Wednesday, August 13, 2008 12:12 PM A D J U S T T H E W I N D O W S V O L U M E C O N T R O L — Click or double-click the speaker icon in the lower-right corner of your screen. Ensure that the volume is turned up and that the sound is not muted. D I S C O N N E C T H E A D P H O N E S F R O M T H E H E A D P H O N E C O N N E C T O R — Sound from the speakers is automatically disabled when headphones are connected to the computer’s front-panel headphone connector.
book.book Page 132 Wednesday, August 13, 2008 12:12 PM 3 Turn on the computer. 4 At the Windows desktop, use the touch pad to move the cursor around, select an icon, and open it. If the touch pad operates correctly, the mouse may be defective. C H E C K T H E S YS T E M S E T U P P R O G R A M S E T T I N G S — Verify that the system setup program lists the correct device for the pointing device option. (The computer automatically recognizes a USB mouse without making any setting adjustments.
book.book Page 133 Wednesday, August 13, 2008 12:12 PM CHECK THE MONITOR POWER LIGHT • If the power light is lit or blinking, the monitor has power. • If the power light is off, firmly press the button to ensure that the monitor is turned on. • If the power light is blinking, press a key on the keyboard or move the mouse to resume normal operation. TE S T T H E E L E C T R I C A L O U T L E T — Ensure that the electrical outlet is working by testing it with another device, such as a lamp.
book.book Page 134 Wednesday, August 13, 2008 12:12 PM If the external monitor works, the computer display or video controller may be defective. Contact Dell (see "Contacting Dell" on page 239). Power Lights CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
book.book Page 135 Wednesday, August 13, 2008 12:12 PM • Eliminate interference.
book.
book.book Page 137 Wednesday, August 13, 2008 12:12 PM System Setup Program Overview NOTE: Your operating system may automatically configure most of the options available in the system setup program, thus overriding options that you set through the system setup program. (An exception is the External Hot Key option, which you can disable or enable only through the system setup program.) For more information on configuring features for your operating system, access the Help and Support Center.
book.book Page 138 Wednesday, August 13, 2008 12:12 PM NOTE: Unless you are an expert computer user or are directed to do so by Dell technical support, do not change the system setup settings. Certain changes might make your computer work incorrectly. Viewing the System Setup Screens 1 Turn on (or restart) your computer. 2 When the DELL™ logo appears, press immediately. If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop.
book.book Page 139 Wednesday, August 13, 2008 12:12 PM The Boot Order page displays a general list of the bootable devices that may be installed in your computer, including but not limited to the following: • Diskette Drive • Modular bay HDD • Internal HDD • Optical Drive During the boot routine, the computer starts at the top of the list and scans each enabled device for the operating system start-up files. When the computer finds the files, it stops searching and starts the operating system.
book.book Page 140 Wednesday, August 13, 2008 12:12 PM 5 When the boot device list appears, highlight the device from which you want to boot and press . The computer boots to the selected device. The next time you reboot the computer, the previous boot order is restored.
book.book Page 141 Wednesday, August 13, 2008 12:12 PM Reinstalling Software Drivers What Is a Driver? A driver is a program that controls a device such as a printer, mouse, or keyboard. All devices require a driver program. A driver acts like a translator between the device and any other programs that use the device. Each device has its own set of specialized commands that only its driver recognizes.
book.book Page 142 Wednesday, August 13, 2008 12:12 PM 2 Under Pick a Category, click Performance and Maintenance, and click System. 3 In the System Properties window, click the Hardware tab, and click Device Manager. Microsoft Windows Vista® 1 Click the Windows Vista Start button, , and right-click Computer. 2 Click Properties→Device Manager. NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue.
book.book Page 143 Wednesday, August 13, 2008 12:12 PM NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to enter the Device Manager. 3 Right-click the device for which the new driver was installed and click Properties. 4 Click the Drivers tab→Roll Back Driver.
book.book Page 144 Wednesday, August 13, 2008 12:12 PM 7 Click the Install button (if present) to begin installing the driver or utility. At the welcome screen, follow the screen prompts to complete the installation. If no Install button is present, automatic installation is not an option. For installation instructions, either see the appropriate instructions in the following subsections, or click Extract, follow the extracting instructions, and then read the readme file.
book.book Page 145 Wednesday, August 13, 2008 12:12 PM 3 Double-click the type of device for which you are installing the driver (for example, Audio or Video). 4 Double-click the name of the device for which you are installing the driver. 5 Click the Driver tab→Update Driver→Browse my computer for driver software. 6 Click Browse and browse to the location to which you previously copied the driver files. 7 When the name of the appropriate driver appears, click the name of the driver→OK→Next.
book.book Page 146 Wednesday, August 13, 2008 12:12 PM Restoring Your Operating System You can restore your operating system in the following ways: • System Restore returns your computer to an earlier operating state without affecting data files. Use System Restore as the first solution for restoring your operating system and preserving data files.
book.book Page 147 Wednesday, August 13, 2008 12:12 PM 1 Click Start→All Programs→Accessories→System Tools→System Restore. 2 Click either Restore my computer to an earlier time or Create a restore point. 3 Click Next and follow the remaining on-screen prompts. Windows Vista: 1 Click the Windows Vista Start button, , and click Help and Support. 2 In the search box, type System Restore and press . NOTE: The User Account Control window may appear.
book.book Page 148 Wednesday, August 13, 2008 12:12 PM To see if System Restore is enabled: 1 Click Start→Control Panel→Performance and Maintenance→System. 2 Click the System Restore tab and ensure that Turn off System Restore is unchecked. • Use the disc only if System Restore did not resolve your operating system problem.
book.book Page 149 Wednesday, August 13, 2008 12:12 PM NOTE: The User Account Control window may appear. If you are an administrator on the computer, click Continue; otherwise, contact your administrator to continue the desired action. 3 Click Next and follow the remaining prompts on the screen. In the event that System Restore did not resolve the issue, you may undo the last system restore.
book.book Page 150 Wednesday, August 13, 2008 12:12 PM Using Dell™ PC Restore and Dell Factory Image Restore NOTICE: Using Dell PC Restore or Dell Factory Image Restore permanently deletes all data on the hard drive and removes any programs or drivers installed after you received your computer. If possible, back up the data before using these options. Use PC Restore or Dell Factory Image Restore only if System Restore did not resolve your operating system problem.
book.book Page 151 Wednesday, August 13, 2008 12:12 PM The computer restarts. Because the computer is restored to its original operating state, the screens that appear, such as the End User License Agreement, are the same ones that appeared the first time the computer was turned on. 6 Click Next. The System Restore screen appears and the computer restarts. 7 After the computer restarts, click OK.
book.book Page 152 Wednesday, August 13, 2008 12:12 PM 7 Click Finish to close the PC Restore Removal window and restart the computer. Windows Vista: Dell Factory Image Restore 1 Turn on the computer. When the Dell logo appears, press several times to access the Vista Advanced Boot Options Window. 2 Select Repair Your Computer. The System Recovery Options window appears. 3 Select a keyboard layout and click Next. 4 To access the recovery options, log on as a local user.
book.book Page 153 Wednesday, August 13, 2008 12:12 PM Device Driver Rollback does not resolve the problem, then use System Restore to return your operating system to the operating state it was in before you installed the new device driver. See "Enabling System Restore" on page 147. NOTICE: Before performing the installation, back up all data files on your primary hard drive. For conventional hard drive configurations, the primary hard drive is the first drive detected by the computer.
book.book Page 154 Wednesday, August 13, 2008 12:12 PM 5 When the boot device list appears, highlight CD/DVD/CD-RW Drive and press . 6 Press any key to Boot from CD-ROM. 7 Follow the instructions on the screen to complete the installation.
book.book Page 155 Wednesday, August 13, 2008 12:12 PM Adding and Replacing Parts Before You Begin This section provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist: • You have performed the steps in "Turning Off Your Computer" on page 155 and "Before Working Inside Your Computer" on page 156. • You have read the safety information in your Dell™ Product Information Guide.
book.book Page 156 Wednesday, August 13, 2008 12:12 PM In the Microsoft® Windows® XP operating system, click Start→Shut Down→Shut down. In the Microsoft® Windows Vista® operating system, click the Windows Vista Start button , click the arrow in the lower-right corner of the Start menu as shown below, and then click Shut Down. The computer turns off after the operating system shutdown process is complete. 2 Ensure that the computer and all attached devices are turned off.
book.book Page 157 Wednesday, August 13, 2008 12:12 PM 1 Ensure that the work surface is flat and clean to prevent the computer cover from being scratched. 2 Turn off your computer (see "Turning Off Your Computer" on page 155). 3 If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions. NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.
book.book Page 158 Wednesday, August 13, 2008 12:12 PM b Remove the battery from the battery bay. 8 Open the display. 9 Press the power button to ground the system board. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the display. NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer.
book.book Page 159 Wednesday, August 13, 2008 12:12 PM 1 3 1 optical drive 3 notch 2 2 indentation for M2.5 x 8-mm security screw 4 Pull the drive out of the drive bay. Hard Drive Removing the Hard Drive CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before working inside your computer, follow the safety instructions located in the Product Information Guide.
book.book Page 160 Wednesday, August 13, 2008 12:12 PM NOTICE: Hard drives are extremely fragile; even a slight bump can damage the drive. NOTE: Dell does not guarantee compatibility or provide support for hard drives from sources other than Dell. To replace the hard drive in the hard drive bay: 1 Follow the procedures in "Before You Begin" on page 155. 2 Turn the computer over, and remove the two M3 x 3-mm hard drive screws.
book.book Page 161 Wednesday, August 13, 2008 12:12 PM Replacing the Hard Drive NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector. 1 Slide the hard drive into the bay until it is fully seated. 2 Replace and tighten the screws. 3 Use the Operating System media to install the operating system for your computer. 4 Use the Drivers and Utilities media to install the drivers and utilities for your computer.
book.book Page 162 Wednesday, August 13, 2008 12:12 PM NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips. 3 If you are replacing a memory module, remove the existing module: 162 a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. b Remove the module from the connector at a 45-degree angle.
book.book Page 163 Wednesday, August 13, 2008 12:12 PM 1 memory module 2 securing clips (2) Replacing the Memory Module(s) NOTE: For optimal performance, identical memory modules should be used in each connector. 1 Ground yourself and install the new memory module: NOTE: If a memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.. a Align the notch in the module edge connector with the tab in the connector slot.
book.book Page 164 Wednesday, August 13, 2008 12:12 PM . 2 Replace the memory module cover and tighten the captive screws. NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer. 3 Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet. 4 Turn on the computer.
book.book Page 165 Wednesday, August 13, 2008 12:12 PM Modem Removing the Modem If you ordered the optional modem at the same time you ordered your computer, the modem is already installed. CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. 1 Follow the procedures in "Before Working Inside Your Computer" on page 156. 2 Turn the computer over, and loosen the two captive screws on the modem cover. 3 Remove the cover from the computer.
book.book Page 166 Wednesday, August 13, 2008 12:12 PM 4 5 3 2 1 1 system board connector 2 M2 x 3-mm screw 3 pull-tab 4 modem 5 modem cable NOTICE: Do not disconnect the modem cable from the system board. Replacing the Modem 1 Connect the modem cable to the modem. NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 2 Align the modem with the screw holes and press the modem into the connector on the system board.
book.book Page 167 Wednesday, August 13, 2008 12:12 PM 4 Replace the cover. Mini Card CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. NOTICE: To prevent damage to the system board, remove the main battery before you service the computer. NOTE: Depending on your system, the Mini Card may be located under the keyboard or under a cover on the bottom of your system.
book.book Page 168 Wednesday, August 13, 2008 12:12 PM 4 Ground yourself by touching one of the metal connectors on the back of the computer. NOTE: If you leave the area, ground yourself again when you return to the computer. 5 If a mini-cmini-cardard is not already installed, go to step 6. If you are replacing a mini-card, remove the existing card: Disconnect the antenna cables from the mini-card.
book.
book.book Page 170 Wednesday, August 13, 2008 12:12 PM NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 6 Install the replacement mini-card: a Align the mini-card with the connector at a 45-degree angle, and press the mini-card down into the securing clips until the card clicks into place.
book.book Page 171 Wednesday, August 13, 2008 12:12 PM antenna cable (black) to the antenna connector with the black triangle. NOTE: If your computer has a gray cable, connect it to the connector with the gray triangle, if one is available on your card. 7 Replace the mini-card/modem cover. Internal Card With Bluetooth® Wireless Technology CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 172 Wednesday, August 13, 2008 12:12 PM NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. NOTE: If you ordered an internal card with Bluetooth wireless technology with your computer, the card is already installed. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156. 2 Remove the M2.5 x 8-mm screw and remove the card cover from the computer.
book.book Page 173 Wednesday, August 13, 2008 12:12 PM Hinge Cover Removing the Hinge Cover CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
book.book Page 174 Wednesday, August 13, 2008 12:12 PM 1 1 hinge cover Replacing the Hinge Cover With the display open all the way (180 degrees) so that it lies flat against the work surface, snap the cover back into place, starting from left to right. Keyboard CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 175 Wednesday, August 13, 2008 12:12 PM NOTICE: The key caps on the keyboard are fragile, easily dislodged, and timeconsuming to replace. Be careful when removing and handling the keyboard. 4 Lift the keyboard and hold it up and slightly forward to provide access to the keyboard connector. 5 To disconnect the keyboard cable from the keyboard connector on the system board, rotate the keyboard connector latch toward the front of the computer.
book.book Page 176 Wednesday, August 13, 2008 12:12 PM Display CAUTION: Only trained service technicians are authorized to remove or replace the component covered by the following procedure. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. Removing the Display Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 177 Wednesday, August 13, 2008 12:12 PM NOTE: You must detach the mini-card antennas (see step 3) before you can remove the display assembly. If a mini-card is installed, disconnect the antenna cables from the card. If one is not installed, detach the antenna cables from their secured location. 3 Disconnect the antenna cables from the mini-card, if applicable. 4 Turn the computer top-side up. 5 Remove the hinge cover (see "Removing the Hinge Cover" on page 173).
book.
book.book Page 179 Wednesday, August 13, 2008 12:12 PM 1 1 mini-card antenna cables NOTE: When removing the display assembly, carefully unthread the mini-card antenna cables through the computer base and ensure that the plastic protectors—if present—remain on the individual cables. 8 Lift the display assembly away from the computer.
book.book Page 180 Wednesday, August 13, 2008 12:12 PM 2 Align the display assembly over the screw holes in the base of the computer.
book.book Page 181 Wednesday, August 13, 2008 12:12 PM NOTE: The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest. 1 1 tab 3 Replace the four M2.5 x 5-mm screws. 4 Connect the display cable to the system board. 5 Reroute the display cable into the cable channel. 6 Replace the hinge cover (see "Replacing the Hinge Cover" on page 174). 7 If a mini-card is installed, connect the antenna cables to the card (see "Mini Card" on page 167).
book.book Page 182 Wednesday, August 13, 2008 12:12 PM 4 3 2 1 5 1 shoulder screws (4), two at the top and two at the bottom) 2 screw covers (2) 3 M2.5 x 5-mm screws (4), one on each corner) 4 rubber screw-covers/display bumpers (6) 5 display bezel Removing the Display Bezel CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 183 Wednesday, August 13, 2008 12:12 PM 3 Remove the six rubber screw-covers/display bumpers. 4 Remove the two screw covers and the four shoulder screws. 5 Remove the four M2.5 x 5-mm screws at the corners of the bezel. NOTICE: Removal of the bezel from the display back cover requires extreme care to avoid damage to the bezel.
book.book Page 184 Wednesday, August 13, 2008 12:12 PM 1 2 1 display back cover 2 tabs 7 Repeat step 6 for the lower-left corner of the bezel. Then use your fingers to release the snaps around the rest of the bezel and lift it away from the display panel.
book.book Page 185 Wednesday, August 13, 2008 12:12 PM 1 2 1 display bezel 2 display panel Replacing the Display Bezel 1 Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel. 2 Replace the four M2.5 x 5-mm screws on the corners of the bezel. 3 Replace the four shoulder screws and two screw covers. 4 Replace the six rubber screw-cover/display bumpers around the bezel.
book.book Page 186 Wednesday, August 13, 2008 12:12 PM Removing the Display Panel 1 4 2 3 1 display panel 2 M2 x 3-mm screws (8) 3 display back cover 4 grounding wire and captive screw CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
book.book Page 187 Wednesday, August 13, 2008 12:12 PM 5 Remove the eight M2 x 3-mm screws (four on each side of the display panel). 6 Lift the display panel out of the display back cover. 7 Press in both sides of the top flex-cable connector, and pull the top flexcable connector away from the display connector. 8 Use the pull-tab to disconnect the bottom flex-cable connector from the inverter connector.
book.book Page 188 Wednesday, August 13, 2008 12:12 PM 4 Tighten the captive screw that attaches the display-panel ground wire to the display back cover. 5 Replace the eight M2 x 3-mm screws (four on each side) around the display panel. 6 Replace the display bezel (see "Replacing the Display Bezel" on page 185). Display Latch CAUTION: Only trained service technicians are authorized to remove or replace the component covered by the following procedure.
book.book Page 189 Wednesday, August 13, 2008 12:12 PM 1 2 1 spring 2 display latch Replacing the Display Latch 1 Replace the spring that attaches the latch to the display panel. 2 Align the latch with the display panel and slide the latch to the left to secure it into place. Coin-Cell Battery Removing the Coin-Cell Battery CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 190 Wednesday, August 13, 2008 12:12 PM NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156. 2 Remove the hinge cover (see "Removing the Hinge Cover" on page 173). 3 Remove the keyboard (see "Keyboard" on page 174).
book.book Page 191 Wednesday, August 13, 2008 12:12 PM 1 coin-cell battery 3 battery cable connector 2 release latch Replacing the Coin-Cell Battery 1 Install the replacement battery: a With the positive side up, insert the battery at a 30-degree angle under the release latch, and then push the battery into place. b Connect the battery cable to the connector on the system board. 2 Replace the keyboard (see "Keyboard" on page 174).
book.book Page 192 Wednesday, August 13, 2008 12:12 PM 1 2 1 FCM 2 screw Replacing the FCM 1 Align the flash card module with the top of the system board and gently snap it into place. 2 Replace the M2.5 x 5-mm screw on the top of the flash card module. 3 Replace the display assembly (see "Replacing the Display Assembly" on page 179). 4 Replace the keyboard (see "Keyboard" on page 174). 5 Replace the hinge cover (see "Replacing the Hinge Cover" on page 174).
book.book Page 193 Wednesday, August 13, 2008 12:12 PM Removing the Palm Rest CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
book.book Page 194 Wednesday, August 13, 2008 12:12 PM 1 M2.5 x 5-mm screws (6) NOTE: If you are installing a new palm rest, remove the coin-cell battery from the old palm rest so that you can install it on the new palm rest. If you are removing the palm rest only to access other computer components, you do not need to remove the coin-cell battery from the palm rest. 7 Remove the coin-cell battery, if appropriate (see "Removing the Coin-Cell Battery" on page 189).
book.book Page 195 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 biometric reader connector 3 LED board connector 2 touch-pad connector 10 Disconnect the LED board connector. 11 Lift the palm rest and remove it from the computer. Replacing the Palm Rest 1 Align the palm rest with the base and gently snap the palm rest into place. 2 Reconnect the touch-pad connector to the system board. 3 Reconnect the LED board connector to the system board.
book.book Page 196 Wednesday, August 13, 2008 12:12 PM 7 Replace the display assembly (see "Replacing the Display Assembly" on page 179). 8 Replace the keyboard (see "Keyboard" on page 174). 9 Replace the hinge cover (see "Replacing the Hinge Cover" on page 174). Speakers Removing the Speakers CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 197 Wednesday, August 13, 2008 12:12 PM 1 3 2 4 5 6 1 M2.5 x 5-mm screws (4) 2 cable guides 3 tape 4 speakers (2) 5 speaker cable 6 connector or system board Replacing the Speakers 1 Connect the speaker cable connector to the connector on the system board. 2 Align the speakers on the screw holes for securing the speakers to the computer base. 3 Replace the four M2.5 x 5-mm screws to secure the speakers in place (two on each speaker).
book.book Page 198 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156.
book.book Page 199 Wednesday, August 13, 2008 12:12 PM 2 3 1 4 7 6 5 1 USB port board 2 M2.5 x 5-mm screw 3 notch 4 USB-port-5 board connector 5 system board connector 6 tab 7 pin Replacing the USB Port Board 1 Insert the notch on the USB port board under the small tab on the computer base and the other side of the board over the pin. 2 Replace the M2.5 x 5-mm screw. 3 Reconnect the cable to the system board. 4 Replace the palm rest (see "Replacing the Palm Rest" on page 195).
book.book Page 200 Wednesday, August 13, 2008 12:12 PM 5 Replace the display assembly (see "Replacing the Display Assembly" on page 179). 6 Replace the keyboard (see "Keyboard" on page 174). 7 Replace the hinge cover (see "Replacing the Hinge Cover" on page 174). Processor Thermal-Cooling Assembly CAUTION: Only trained service technicians are authorized to remove or replace the component covered by the following procedure.
book.book Page 201 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 processor thermal-cooling 3 thermal pad 2 captive screws (4) Replacing the Processor Thermal-Cooling Assembly 1 Place a new thermal pad on the part of the thermal-cooling assembly that will cover the new processor: a Remove the backing from the new thermal pad, taking care not to tear the pad. b Place the pad’s adhesive-side against the part of the thermal-cooling assembly that will cover the new processor, and press it into place.
book.book Page 202 Wednesday, August 13, 2008 12:12 PM 3 Tighten the four captive screws, labeled "1" through "4," in consecutive order. Processor Module CAUTION: Only trained service technicians are authorized to remove or replace the component covered by the following procedure. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
book.book Page 203 Wednesday, August 13, 2008 12:12 PM 6 Remove the processor thermal-cooling assembly (see "Removing the Processor Thermal-Cooling Assembly" on page 200). NOTICE: When removing the processor module, pull the module straight up. Be careful not to bend the pins on the processor module. 7 To loosen the ZIF socket, use a small, flat-blade screwdriver and rotate the ZIF-socket cam screw counterclockwise until it comes to the cam stop.
book.book Page 204 Wednesday, August 13, 2008 12:12 PM Replacing the Processor Module NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIF socket does not require force. NOTICE: A processor module that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIF socket.
book.book Page 205 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156.
book.book Page 206 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 captive screws 3 system board connector 2 video card/thermal-cooling assembly Replacing the Video Card/Thermal-Cooling Assembly 1 Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down. NOTE: The video card/thermal-cooling assembly is labeled "PUSH HERE." 2 Tighten the four captive screws on the video card/thermal-cooling assembly.
book.book Page 207 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156.
book.book Page 208 Wednesday, August 13, 2008 12:12 PM 2 1 3 4 208 1 fan for processor/thermal - cooling assembly 2 M2.
book.book Page 209 Wednesday, August 13, 2008 12:12 PM 2 1 3 4 1 fan for video card/thermal - cooling assembly, if installed 2 M2.5 x 5-mm screws (2) 3 fan cable 4 fan-cable system board connector Replacing the System Fan(s) 1 Carefully align the system fan over the system board and press down. 2 Tighten the two M2.5 x 5-mm screws on the system fan ExpressCard Cage CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 210 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer. 1 Follow the instructions in "Before Working Inside Your Computer" on page 156.
book.book Page 211 Wednesday, August 13, 2008 12:12 PM 1 hard drive bay 2 ExpressCard cage 3 M 2 x 3-mm screws (4) 4 ExpressCard connector 9 Remove the four M2 x 3-mm screws that attach the ExpressCard cage to the top of the hard drive bay. Smart Card Reader Removing the Smart Card Reader CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
book.book Page 212 Wednesday, August 13, 2008 12:12 PM 2 1 3 1 smart card reader 3 smart-card reader connector on system board 2 smart-card reader screw Replacing the Smart Card Reader 1 Carefully align the smart card reader over the smart card reader connector on the system board and press it into place beneath the side notches. 2 Tighten the smart-card reader screw.
book.book Page 213 Wednesday, August 13, 2008 12:12 PM NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer. NOTICE: To help prevent damage to the system board, remove the main battery (see "Before Working Inside Your Computer" on page 156) before working inside the computer.
book.
book.book Page 215 Wednesday, August 13, 2008 12:12 PM 1 2 5 4 3 1 USB port-board connector 2 ExpressCard connector 3 smart-card reader connector 4 internal card with Bluetooth wireless technology connector 5 speaker connector 12 Disconnect the smart-card reader connector from the system board. 13 Disconnect the speaker connector from the system board. 14 Disconnect the connector for the internal card with Bluetooth® wireless technology from the system board.
book.book Page 216 Wednesday, August 13, 2008 12:12 PM 18 Remove the video card/thermal-cooling assembly, if present (see "Removing the Video Card/Thermal-Cooling Assembly" on page 204). NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling unit (heat sink) from the video card. 19 Remove the processor thermal-cooling assembly (see "Removing the Processor Thermal-Cooling Assembly" on page 200).
book.book Page 217 Wednesday, August 13, 2008 12:12 PM 1 1 system board M2.5 x 5-mm screws (4) 23 Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer base: a With the back of the computer facing you, grasp the upper-right corner of the system board and lift it slightly.
book.book Page 218 Wednesday, August 13, 2008 12:12 PM 1 1 system board assembly Replacing the System Board 1 Perform all of the steps in "Removing the System Board" on page 212 in reverse order. NOTICE: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 2 Turn on the computer.
book.book Page 219 Wednesday, August 13, 2008 12:12 PM Battery Latch Assembly Removing the Battery Latch Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
book.book Page 220 Wednesday, August 13, 2008 12:12 PM 1 2 3 1 ExpressCard cage 3 hard drive bay 2 M2.5 x 5-mm screws (4) 8 Remove the screw in the battery latch assembly. When you remove the screw, the battery latch release on the bottom of the computer will also be removed.
book.book Page 221 Wednesday, August 13, 2008 12:12 PM 1 2 1 screw 2 battery latch assembly 9 Remove the spring from the hook on the computer base by lifting it up and away with a screwdriver or a plastic scribe.
book.book Page 222 Wednesday, August 13, 2008 12:12 PM 1 hook 2 spring 10 Remove the plastic battery-latch assembly by twisting the assembly slightly and lifting it out of the channel and away from the computer base. 1 1 battery latch assembly Replacing the Battery Latch Assembly 1 Insert the latch assembly into the channel on the computer base, and press it into place. 2 Using a small screwdriver, hook the spring over the hook on the computer base.
book.book Page 223 Wednesday, August 13, 2008 12:12 PM 6 Replace in reverse order the other components that you removed in "Removing the Battery Latch Assembly" on page 219. Flashing the BIOS NOTICE: Plug the AC adapter into a known good power source to prevent a loss of power. Failure to do so may cause system damage. 1 Ensure that the AC adapter is plugged in and that the main battery is installed properly.
book.
book.
book.
book.book Page 227 Wednesday, August 13, 2008 12:12 PM Dell™ QuickSet NOTE: This feature may not be available on your computer. Dell™ QuickSet provides you with easy access to configure or view the following types of settings: • Network connectivity • Power management • Display • System information Depending on what you want to do in Dell™ QuickSet, you can start it by either clicking, double-clicking, or right-clicking the QuickSet icon in the Microsoft® Windows® taskbar.
book.
book.book Page 229 Wednesday, August 13, 2008 12:12 PM Traveling With Your Computer Identifying Your Computer • Attach a name tag or business card to the computer. • Write down your Service Tag and store it in a safe place away from the computer or carrying case. Use the Service Tag if you need to report a loss or theft to law enforcement officials and to Dell. • Create a file on the Microsoft® Windows® desktop called if_found.
book.book Page 230 Wednesday, August 13, 2008 12:12 PM • Use the optional Dell™ carrying case to pack the computer and its accessories together safely. • Avoid packing the computer with items such as shaving cream, colognes, perfumes, or food. NOTICE: If the computer has been exposed to extreme temperatures, allow it to acclimate to room temperature for 1 hour before turning it on.
book.book Page 231 Wednesday, August 13, 2008 12:12 PM • Ensure that you have a charged battery available in case you are asked to turn on the computer. • Prior to entering the airplane, verify that using a computer is permitted. Some airlines forbid the use of electronic devices during flight. All airlines forbid the use of electronic devices during takeoff and landing.
book.
book.book Page 233 Wednesday, August 13, 2008 12:12 PM Getting Help Obtaining Assistance CAUTION: If you need to remove the computer cover, first disconnect the computer power and modem cables from all electrical outlets. If you experience a problem with your computer, you can complete the following steps to diagnose and troubleshoot the problem: 1 See "Troubleshooting" on page 115 for information and procedures that pertain to the problem your computer is experiencing.
book.book Page 234 Wednesday, August 13, 2008 12:12 PM NOTE: Some of the following services are not always available in all locations outside the continental U.S. Call your local Dell representative for information on availability. Technical Support and Customer Service Dell's support service is available to answer your questions about Dell™ hardware. Our support staff uses computer-based diagnostics to provide fast, accurate answers.
book.book Page 235 Wednesday, August 13, 2008 12:12 PM mobile_support@us.dell.com support@us.dell.com la-techsupport@dell.com (Latin America and Caribbean countries only) apsupport@dell.com (Asian/Pacific countries only) • Dell Marketing and Sales e-mail addresses apmarketing@dell.com (Asian/Pacific countries only) sales_canada@dell.com (Canada only) • Anonymous file transfer protocol (FTP) ftp.dell.com Log in as user: anonymous, and use your e-mail address as your password.
book.book Page 236 Wednesday, August 13, 2008 12:12 PM Product Information If you need information about additional products available from Dell, or if you would like to place an order, visit the Dell website at www.dell.com. For the telephone number to call for your region or to speak to a sales specialist, see the "Contacting Dell" on page 239.
book.book Page 237 Wednesday, August 13, 2008 12:12 PM Remember to fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 238). If possible, turn on your computer before you call Dell for assistance and call from a telephone at or near the computer. You may be asked to type some commands at the keyboard, relay detailed information during operations, or try other troubleshooting steps possible only at the computer itself. Ensure that the computer documentation is available.
book.
book.book Page 239 Wednesday, August 13, 2008 12:12 PM Contacting Dell For customers in the United States, call 800-WWW-DELL (800-999-3355). NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area.
book.
book.book Page 241 Wednesday, August 13, 2008 12:12 PM Specifications NOTE: Your computer comes in different configurations. To determine the configuration of your computer, see "Determining Your Computer’s Configuration" on page 23.
book.book Page 242 Wednesday, August 13, 2008 12:12 PM ExpressCard (continued) ExpressCard connector one ExpressCard slot (54 mm) 1.5 V and 3.3 V Cards supported ExpressCard/34 (34 mm) and ExpressCard/54 (54 mm) ExpressCard connector size 26 pins Memory Memory module connector two user-accessible SODIMM connectors Memory module capacities 512 MB, 1 GB, 2 GB, and 4 GB Add-in flash memory card 1 GB, Type 1 Mini-Card support limited to Microsoft Vista® Memory type 1.
book.book Page 243 Wednesday, August 13, 2008 12:12 PM Ports and Connectors Audio microphone-in connector, stereo headphones/speakers connector Mini-Card 2 type 111A Mini-Card slots IEEE 1394a 4-pin mini, nonpowered connector Modem RJ-11 port Network adapter RJ-45 port S-video TV-out 7-pin mini-DIN connector (optional S-video to composite video adapter cable; optional S-video to component video adapter cable) USB six 4-pin USB 2.
book.book Page 244 Wednesday, August 13, 2008 12:12 PM Video (continued) video memory 256 MB, additional system memory will be used through TurboCache.
book.book Page 245 Wednesday, August 13, 2008 12:12 PM Display (continued) Operating angle 0° (closed) to 180° Viewing angle (typical): Horizontal ±40° (WXGA+) ±60° (WUXGA) Vertical +15°/–30° (WXGA+) +40°/-50° (WUXGA) Pixel pitch: WXGA+ 0.255 mm (17-inch display) WUXGA 0.191 mm (17-inch display) Power consumption (panel with backlight) (typical): Controls 7.54 W brightness can be controlled through keyboard shortcuts Keyboard Number of keys 87 (U.S.
book.book Page 246 Wednesday, August 13, 2008 12:12 PM Battery (continued) Height 21.5 mm (0.83 inches) Width 139.0 mm (5.47 inches) Weight 0.484 kg (9 cell) Voltage 10.8 VDC Charge time (approximate): Computer off 2 hours (at 100% in 2 hours) 1 hour (at 80% in 1 hour) Operating time Battery operating time varies depending on operating conditions and can be significantly reduced under certain power-intensive conditions. See "Power Problems" on page 128.
book.book Page 247 Wednesday, August 13, 2008 12:12 PM AC Adapter (continued) Height 36 mm (1.35 inches) Width 65 mm (2.39 inches) Depth 169.5 mm (6.04 inches) Weight (with cables) 0.76 kg (1.68 lb) Temperature range: Operating 0° to 35°C (32° to 95°F) Storage –40° to 65°C (–40° to 149°F) Physical Height 41.5 mm (1.6 inches) Width 394 mm (15.5 inches) Depth 288 mm (11.3 inches) Weight (with 9-cell battery): With optical drive 3.96 kg (8.
book.book Page 248 Wednesday, August 13, 2008 12:12 PM Environmental (continued) Storage 163 G Altitude (maximum): Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.2 to 10,668 m (–50 to 35,000 ft) Airborne contaminant level 248 Specifications G2 or lower as defined by ISA-S71.
book.book Page 249 Wednesday, August 13, 2008 12:12 PM Appendix Macrovision Product Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. FCC Notice (U.S.
book.book Page 250 Wednesday, August 13, 2008 12:12 PM cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures: • Reorient the receiving antenna. • Relocate the system with respect to the receiver. • Move the system away from the receiver.
book.book Page 251 Wednesday, August 13, 2008 12:12 PM Glossary Terms in this Glossary are provided for informational purposes only and may or may not describe features included with your particular computer. A AC — alternating current — The form of electricity that powers your computer when you plug the AC adapter power cable in to an electrical outlet.
book.book Page 252 Wednesday, August 13, 2008 12:12 PM of native, uncompressed surround sound. BD-R is a recordable Blu-ray Disc that can be written to once. BD-RE is a Blu-ray Disc that can be erased and re-recorded multiple times. Bluetooth® wireless technology — A wireless technology standard for short-range (9 m [29 feet]) networking devices that allows for enabled devices to automatically recognize each other. boot sequence — Specifies the order of the devices from which the computer attempts to boot.
book.book Page 253 Wednesday, August 13, 2008 12:12 PM and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs only once. CD-RW/DVD drive — A drive, sometimes referred to as a combo drive, that can read CDs and DVDs and write to CD-RW (rewritable CDs) and CD-R (recordable CDs) discs. You can write to CD-RW discs multiple times, but you can write to CD-R discs only once.
book.book Page 254 Wednesday, August 13, 2008 12:12 PM cable connectors. disk striping — A technique for spreading data over multiple disk drives. Disk striping can speed up operations that retrieve data from disk storage. Computers that use disk striping generally allow the user to select the data unit size or stripe width. DMA — direct memory access — A channel that allows certain types of data transfer between RAM and a device to bypass the processor.
book.book Page 255 Wednesday, August 13, 2008 12:12 PM E ECC — error checking and correction — A type of memory that includes special circuitry for testing the accuracy of data as it passes in and out of memory. ECP — extended capabilities port — A parallel connector design that provides improved bidirectional data transmission. Similar to EPP, ECP uses direct memory access to transfer data and often improves performance.
book.book Page 256 Wednesday, August 13, 2008 12:12 PM FBD — fully-buffered DIMM — A DIMM with DDR2 DRAM chips and an Advanced Memory Buffer (AMB) that speeds communication between the DDR2 SDRAM chips and the system. FCC — Federal Communications Commission — A U.S. agency responsible for enforcing communications-related regulations that state how much radiation computers and other electronic equipment can emit.
book.book Page 257 Wednesday, August 13, 2008 12:12 PM heat sink — A metal plate on some processors that helps dissipate heat. hibernate mode — A power management mode that saves everything in memory to a reserved space on the hard drive and then turns off the computer. When you restart the computer, the memory information that was saved to the hard drive is automatically restored. HTTP — hypertext transfer protocol — A protocol for exchanging files between computers connected to the Internet.
book.book Page 258 Wednesday, August 13, 2008 12:12 PM cannot operate both devices simultaneously. ISP — Internet service provider — A company that allows you to access its host server to connect directly to the Internet, send and receive e-mail, and access websites. The ISP typically provides you with a software package, user name, and access phone numbers for a fee. K Kb — kilobit — A unit of data that equals 1024 bits. A measurement of the capacity of memory integrated circuits.
book.book Page 259 Wednesday, August 13, 2008 12:12 PM MB/sec — megabytes per second — One million bytes per second. This measurement is typically used for data transfer ratings. memory — A temporary data storage area inside your computer. Because the data in memory is not permanent, it is recommended that you frequently save your files while you are working on them, and always save your files before you shut down the computer.
book.book Page 260 Wednesday, August 13, 2008 12:12 PM providing quick access to programs and computer functions, such as the clock, volume control, and print status. Also referred to as system tray. ns — nanosecond — A measure of time that equals one billionth of a second. NVRAM — nonvolatile random access memory — A type of memory that stores data when the computer is turned off or loses its external power source.
book.book Page 261 Wednesday, August 13, 2008 12:12 PM and Play provides automatic installation, configuration, and compatibility with existing hardware if the BIOS, operating system, and all devices are Plug and Play compliant. POST — power-on self-test — Diagnostics programs, loaded automatically by the BIOS, that perform basic tests on the major computer components, such as memory, hard drives, and video. If no problems are detected during POST, the computer continues the start-up.
book.book Page 262 Wednesday, August 13, 2008 12:12 PM lower end of the electromagnetic frequency spectrum and are more likely to have interference than the higher frequency radiations, such as infrared and light. ROM — read-only memory — Memory that stores data and programs that cannot be deleted or written to by the computer. ROM, unlike RAM, retains its contents after you shut down your computer. Some programs essential to the operation of your computer reside in ROM.
book.book Page 263 Wednesday, August 13, 2008 12:12 PM first. Shortcut icons do not change the location of files. If you delete a shortcut, the original file is not affected. Also, you can rename a shortcut icon. SIM — Subscriber Identity Module — A SIM card contains a microchip that encrypts voice and data transmissions. SIM cards can be used in phones or portable computers. smart card — A card that is embedded with a processor and a memory chip.
book.book Page 264 Wednesday, August 13, 2008 12:12 PM T TAPI — telephony application programming interface — Enables Windows programs to operate with a wide variety of telephony devices, including voice, data, fax, and video. text editor — A program used to create and edit files that contain only text; for example, Windows Notepad uses a text editor. Text editors do not usually provide word wrap or formatting functionality (the option to underline, change fonts, and so on).
book.book Page 265 Wednesday, August 13, 2008 12:12 PM controllers that supports resolutions up to 1600 x 1200. V video controller — The circuitry on a video card or on the system board (in computers with an integrated video controller) that provides the video capabilities—in combination with the monitor—for your computer. video memory — Memory that consists of memory chips dedicated to video functions. Video memory is usually faster than system memory.
book.book Page 266 Wednesday, August 13, 2008 12:12 PM to provide Internet access. write-protected — Files or media that cannot be changed. Use write-protection when you want to protect data from being changed or destroyed. To write-protect a 3.5-inch floppy disk, slide its write-protect tab to the open position. WWAN — wireless wide area network. A wireless high-speed data network using cellular technology and covering a much larger geographic area than WLAN.
book.
book.
