Setup Guide
Installing Your Dell
™
Latitude ON
™
Flash Card
1
Disconnect the AC adapter and remove the battery.
WARNING: Before performing any of
the steps listed below, read and follow
the safety information that shipped
with your computer.
CAUTION: Do not install or remove the
Dell Latitude ON Flash card when your
computer is turned on.
CAUTION: Electrical and electronic
devices are sensitive to electrostatic
discharge (ESD). Exposure can harm your
device and potentially cause it not to
function properly. Ensure that you are
properly grounded before handling your
Dell Latitude ON Card.
2
Remove the back cover to access the FCM or WWAN
Mini Card slot to install the Latitude ON Flash card.
NOTE: Power connector and battery location varies by computer model.
For more information, see the documentation that shipped with your computer.
NOTE: The FCM and WWAN Mini Card slot location varies by computer model.
For more information, see the documentation on the Dell Support website at
ssuuppppoorrtt..ddeellll..ccoomm//mmaannuuaallss
.
www.dell.com | support.dell.com
Latitude ON Flash support is available
only if your computer is pre-configured
with Latitude ON-Ready.
➔