Dell™ Latitude ON™ Flash Help Setting Up Dell Latitude ON Flash Configuring Network Settings Configuring Remote Connections Using "Chat" Instant Messaging Setting Up your Latitude ON Flash Email Using the LaunchBar Using the Settings Panel Latitude ON / Power button behavior Hot Keys Supported in Latitude ON Flash Getting the Source Code Acknowledgements NOTE: Latitude ON and Precision ON are used interchangeably depending upon the system.
Back to Contents Page Setting Up Dell™ Latitude ON™ Flash To use Account Setup in Windows: If you have not yet created a Latitude ON Flash user account, then after you have booted your computer to the Windows® operating system, a Welcome message box informs you that Latitude ON™ Flash is installed on the computer, and invites you to use it. First, you will need to create an account for use with Latitude ON Flash. 1. Click the Set Up Now button. The Account Setup dialog box will open.
Menu at any time (Start Menu > Programs > Dell Latitude ON Flash Tool > Dell Latitude ON Configuration Utility). This utility allows you to make changes to your account or to delete your account. If you delete your account, pressing the Latitude ON ( ) button on your keyboard would once again launch the Dell Latitude ON Account Setup Wizard. Subsequent Log-ins After you have created an account, a Login screen will appear each time you launch Latitude ON Flash.
Back to Contents Page Configuring Network Settings Enabling LAN, WiFi, or WWAN Connecting to a Local Area Network (LAN) Connecting to a Wireless Network (WiFi) Connecting to a Mobile Broadband Network (WWAN) Enabling LAN, WiFi, or WWAN Before you start using your computer in the Dell™ Latitude ON™ mode, you must configure it to connect to either a LAN, WiFi, or WWAN. The first time you launch Latitude ON Flash, a First-Time Wizard will guide you through the network setup process.
1. Click WiFi at the left side of the Network Configuration dialog box. A list of available networks, their signal strength, and security levels will be shown. 2. Select the network you want to connect to. To connect to a non-broadcasting WiFi network, click the + icon. The Connect to Network dialog box opens. Enter the Network Name and Password, and other information needed to connect. 3. Enter or select the WiFi network's connection information (Security Type, IP/DNS settings, Password, etc.) to connect.
Back to Contents Page 20091005a
Back to Contents Page Configuring Remote Connections Accessing a server remotely via rdesktop Accessing applications on a server remotely via Citrix Receiver Accessing a server remotely using VMware View Client NOTE: If you use one of the three features above more than the others, you can set it as your "default remote desktop protocol." That is, it will be available in the first screen that appears when you launch Latitude ON Flash, for convenient selection.
2. Enter the IP address of the desired server. Click Connect. 3. In the next dialog box that appears, enter the related Username, Password, and Domain. 4. Click the Login button. The system will then provide you the VMware environment you are authorized to access based on your enterprise rules.
Back to Contents Page Using "Chat" Instant Messaging Setting Up Chat Accounts Adding Buddies and Groups Adding New Groups Sending a Chat message Setting Up Chat Accounts The Chat feature allows you to chat with your friends using your existing user accounts in a variety of popular Instant Messaging tools. You can also organize your "buddies" into groups, and perform many other functions. You can specify detailed Preferences settings and log in to multiple IM accounts simultaneously. Click the Chat icon.
Sending a Chat message Double-click on the name of the Buddy to whom you want to send a message and then type the message into the New Instant Message dialog box. Alternatively, you can select New Instant Message... from the Buddies Menu in the Chat window and then enter the Alias or the Screen Name of the Buddy you want to send a message to.
Back to Contents Page Setting Up Your Latitude ON™ Flash Email Before you begin sending or receiving Email in the Latitude ON™ mode, you must specify which web-based Email client you want to use with Latitude ON Flash. During the First-Time Wizard, you were given an opportunity to do this. If you skipped this set-up during the First-Time Wizard, then the same dialog box will appear the first time you click the Mail icon in the LaunchBar or in the main screen of Latitude ON Flash. Click the Mail icon.
Back to Contents Page Using the LaunchBar The LaunchBar is located at the bottom of the Latitude ON screen by default. (You can change the position of the LaunchBar by clicking on the LaunchBar icon in the Settings panel and then setting the Orientation.) Click on the icons in the LaunchBar to invoke/switch between applications, or to launch various utilities. Each icon on the LaunchBar is individually illustrated below. Mail.
WWAN. If a WWAN device is inserted and enabled, this WWAN icon will be displayed in the LaunchBar. (If the device is detected but disabled, it will display as .) Hovering the mouse pointer over the icon will display the current WWAN connection status and the detected signal strength. Clicking on the icon will open the Network Configuration dialog box, with the WWAN tab active. Network status. Hovering the mouse pointer over this icon will display the current LAN and WiFi connection status.
Back to Contents Page Using the Settings Panel To open the Settings Panel, click the icon in the LaunchBar. Then, click on the desired icon within the Settings Panel to open the corresponding configuration tool. The following tools are available: Date and Time. Opens a dialog box that lets you set the date and time, and select a time zone. You can also open this dialog box by clicking on the time display in the LaunchBar of the Latitude ON screen. Input Language.
Applications. Click the Edit button for the related item if you want to change the current settings for: Mail Application: The default web-based Email service to be accessed when the Mail icon is clicked in the LaunchBar or in the main screen. rdesktop: A variety of settings for type of display, local resources, and logon. Remote Desktop: Choose the remote desktop application you want to be available for selection in the first screen every time you log in to Latitude ON Flash. User Account.
Back to Contents Page Latitude ON button / Power button Behavior The following tables describe the effect of pressing the Power button, or the Latitude ON button ( on the current state of the computer.
Back to Contents Page Hotkeys Supported in Latitude ON™ Flash Hot Key Action Fn + F2 Enable / Disable battery charger Fn + F4 Enable / Disable Numlock Fn + ← Enable / Disable Ambient Light Sensor Fn + → Enable / Disable backlit keyboard (if installed) Fn + ↑ Increase LCD brightness Fn + ↓ Decrease LCD brightness Back to Contents Page 20091005a
Back to Contents Page Obtaining source code for Open Source programs This product contains software that is licensed under the General Public License Version 2 (“GPL”) which is listed below in “GPL Software.” This product also contains software that is licensed under the Lesser General Public License Version 2.1 (“LGPL”) which is listed below in “LGPL Software.” We have included copies of the GPL and the LGPL in the Acknowledgements section.
libatk1.0-0 1.22.0-0 libbz2 1.0.3 libc6 2.7-10 libcdparanoia 3a9.8-11 libcups 1.1.20 libcupsys2 1.3.7-1 libdbus-glib-1-2 0.74-2 libdirectfb 1.2.0 libgail-gnome-module 1.20.0-1 libgcc1 4.2.4-1 libgconf2-4 2.22.0-0 libgconf2-4 2.4.0-1 libglib 2.16.6 libglib2.0-0 2.16.6-0 libglib2.0-0 2.17.4-0 libgpg-error 1.4.2 libgtk2.0-0 2.12.9-3 libjpeg 6.2.0 libkeyutils1 1.2-4 libltdl3 1.5.26-1 liborbit2 2.10.0-0 liborbit2 2.14.12-0.1 libpam0g 0.99.7.1-5 libpango1.0-0 1.18.
scim-tables 0.5.7 scim-thai 0.1.1 setuid-root program 3.26.1 squash file system patch 3.3 startup-notification 0.7 Terafik 2.900 The Linux Console Tools 0.2.3 this is the ASN.1 library used in GNUTLS 2.0.17 Ubuntu 8.10 ath9k driver for 2.6.27 kernel Ubuntu 8.10 Ubuntu 8.10 iwlwifi driver for 2.6.27 kernel Ubuntu 8.10 udev 116 usb storage patch 2.6.27.7 uvcvideo_official SVN20081112 uvcview 20071108 vbetool 0.7 WenQuanYi ZenHei 0.8.37 wirelss_tool 29 wpa_supplicant 0.6.
scim 1.4.7 Splashtop and the logo are registered trademarks of DeviceVM, Inc. in the U.S. and elsewhere. All other trademarks, product and company names, and logos are the property of their respective owners. Patented. US patent numbers 7,082,526 and 7,441,113. US and other patents pending.
Back to Contents Page Acknowledgements Official binaries of this product released by DeviceVM, Inc. are made available under the corresponding EULA. Portions of the source code to this product are available under licenses which are both free and open source.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof. 1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. "Executable" means Covered Code in any form other than Source Code. 1.6.
2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, nonexclusive license: 1. Under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and 2.
3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A.
Covered code is provided under this license on an "as is" basis, without warranty of any kind, either expressed or implied, including, without limitation, warranties that the covered code is free of defects, merchantable, fit for a particular purpose or non-infringing. The entire risk as to the quality and performance of the covered code is with you.
Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12.
Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
or menu items -- whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program "Gnomovision" (which makes passes at compilers) written by James Hacker.
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.
Copyright (c) 199x-200x , All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
1987, 1988, 1989 Digital Equipment Corporation, Maynard, Massachusetts.
conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All modifications to the source code must be clearly marked as such.
2.3.1 2.3 2002-2003 PSF yes 2.3.2 2.3.1 2002-2003 PSF yes 2.3.3 2.3.2 2002-2003 PSF yes 2.3.4 2.3.3 2004 PSF yes 2.3.5 2.3.4 2005 PSF yes 2.4 2.3 2004 PSF yes 2.4.1 2.4 2005 PSF yes 2.4.2 2.4.1 2005 PSF yes 2.4.3 2.4.2 2006 PSF yes 2.4.4 2.4.3 2006 PSF yes Footnotes: (1) GPL-compatible doesn't mean that we're distributing Python under the GPL. All Python licenses, unlike the GPL, let you distribute a modified version without making your changes open source.
BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1 1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the Individual or Organization ("Licensee") accessing and otherwise using this software in source or binary form and its associated documentation ("the Software"). 2.
respect to Paragraphs 4, 5, and 7 of this License Agreement. Nothing in this License Agreement shall be deemed to create any relationship of agency, partnership, or joint venture between CNRI and Licensee. This License Agreement does not grant permission to use CNRI trademarks or trade name in a trademark sense to endorse or promote products or services of Licensee, or any third party. 8. By clicking on the "ACCEPT" button where indicated, or by copying, installing or otherwise using Python 1.6.
DeviceVM acknowledges all open source community members, and especially thanks contributors to the following open source projects that we leveraged in developing Splashtop®. If you find your project missing from the list below, please contact DeviceVM through your project lead, and we will add your project name to the list. To obtain the source code, please visit http://www.splashtop.com/developer. bbdock http://bbdock.nethence.com blackbox http://blackboxwm.sourceforge.net busybox http://www.busybox.
