Dell™ Latitude ON™ Flash 도움말 Dell Latitude ON Flash 설정 네트워크 설정 구성 원격 연결 구성 "Chat" 인스턴트 메시징 사용 Latitude ON Flash 전자 메일 설정 LaunchBar 사용 설정 패널 사용 Latitude ON/전원 버튼 동작 Latitude ON Flash에서 지원되는 바로 가기 키 소스 코드 가져오기 감사의 글 참고: Latitude ON과 Precision ON은 시스템에 따라 상호 교환적으로 사용됩니다. "Latitude ON"은 "Precision ON"으로도 알려졌습 니다. 이 문서에서 "Latitude ON"이라는 용어는 Latitude ON 과 Precision ON 기능 모두를 가리키는 데 사용됩니다. 참고: 가장 잦은 질문에 대한 빠른 답변은 http://support.dell.com을 방문하십시오.
목차 페이지로 돌아가기 Dell™ Latitude ON™ Flash설정 Windows에서 계정 설정을 사용하려면: Latitude ON Flash사용자 계정을 아직 만들지 않은 경우 컴퓨터를 Windows® 운영 체제로 부팅하면 시작 메시지 상자가 컴퓨터에 Latitude ON™ Flash가 설치되어 있다고 알려 주면서 사용할 것을 권합니다. 우선, Latitude ON Flash와 함께 사용할 계정을 만들어야 합니다. 1. 지금 설정 버튼을 클릭합니다. 계정 설정 대화 상자가 열립니다. 계정 설정 대화 상자에 현재 Windows 사용자 이름이 표시됩니다. 이 름이 Latitude ON Flash 사용자 계정에 사용됩니다. 아이콘을 2. Latitude ON Flash과 함께 사용할 암호를 입력합니다. 암호 만들기 규칙을 보려면 계정 설정 대화 상자에 있는 물음표 클릭하십시오. 3. 확인 필드에 암호를 다시 입력합니다. 4. 확인을 클릭합니다. 아래에 설명된 것처럼 처음 시작 마법사가 실행됩니다.
이후의 로그인 계정을 만든 후에는 Latitude ON을 시작할 때마다 로그인 화면이 나타납니다. 사용자가 한 명 이상이어서 사용자 ID가 표시되지 않으면 사용 자 변경을 클릭하고 목록에서 사용자 ID를 선택하십시오. Windows 환경에서 Latitude ON 버튼을 누르면 Windows가 최대 절전 모드로 전환되고 Latitude ON Flash환경으로 부팅됩니다. 성공적으로 로그인하면 Latitude ON Flash 의 처음 화면이 나타납니다. 현재 기본값으로 설정된 메일, 웹 브라우저, Chat 인스턴트 메시징, VoIP(Skype™) 및 원격 데스크톱 응용 프로그램의 아이콘이 포함되어 있습니다. 참고: 키보드 종류를 변경하려면 로그인 화면 아래쪽 근처에 있는 키보드 아이콘을 클릭하십시오. 그런 다음 암호를 입력하고 접속 시 간 버튼을 클릭하십시오. 참고: Latitude ON Flash가 매번 새 세션 중에 암호를 입력하라는 메시지를 표시합니다.
목차 페이지로 돌아가기 네트워크 설정 구성 LAN, WiFi 또는 WWAN 사용 LAN 연결 무선 네트워크(WiFi) 연결 모바일 광대역 네트워크(WWAN) 연결 LAN, WiFi 또는 WWAN 사용 Dell™ Latitude ON™ 모드에서 컴퓨터를 사용하기 전에 LAN, WiFi 또는 WWAN에 연결하도록 설정해야 합니다. Latitude ON Flash를 처음 으로 시작하면 처음 시작 마법사가 네트워크 설정 과정을 안내합니다. 또한, 아래에 설명된 것처럼 언제든지 설정을 구성할 수 있습니다. 1. 다음 방법 중 하나로 네트워크 구성 대화 상자를 엽니다. LaunchBar에 있는 네트워크 아이콘 을 클릭합니다. (이 아이콘을 마우스 포인터로 가리키면 현재 LAN과 WiFi 연결 상태가 표 시됩니다.) LaunchBar에 있는 WWAN 아이콘 을 클릭합니다. WWAN 장치가 발견된 경우 이용할 수 있습니다.
브로드캐스트가 아닌 WiFi 네트워크에 연결하려면 + 아이콘을 클릭하십시오. 네트워크 연결 대화 상자가 열립니다. 네트워크 이름과 암호 및 연결에 필요한 기타 정보를 입력하십시오. 3. 연결할 무선 네트워크의 연결 정보(보안 종류, IP/DNS 설정, 암호 등)를 입력하거나 선택합니다. IP/DNS를 수동으로 설정하려면 고급 설정을 클릭합니다. 모바일 광대역 네트워크(WWAN) 연결 WWAN 장치를 설치했다면 이 탭을 이용할 수 있습니다. 그렇지 않다면, 네트워크 구성 대화 상자의 왼쪽에 있는 "WWAN" 아래에 "장치 없 음"이 표시되고, 설정 버튼은 사용할 수 없습니다. 또한, WWAN 장치가 삽입되면 LaunchBar에 WWAN 아이콘 면 이 표시됩니다. 장치는 발견되지만 현재 사용하도록 설정되어 있지 않으 로 표시로 나타납니다. 아이콘을 마우스 포인터로 가리키면 현재 WWAN 연결 상태와 검출된 신호 강도가 표시됩니다.
목차 페이지로 돌아가기 원격 연결 구성 rdesktop을 통해서 서버에 원격 액세스 Citrix Receiver를 통해서 서버에 있는 응용 프로그램에 원격 액세스 VMware View Client를 통해서 서버에 원격 액세스 참고: 위의 세 개 기능 중 하나를 사용하는 경우 해당 기능을 "기본 원격 데스크톱 프로토콜"로 설정할 수 있습니다. 즉, 편리하게 선택 할 수 있도록, Latitude on Flash를 시작하면 나타나는 첫 화면에서 사용할 수 있습니다. 그렇게 하려면, 설정 패널에서 응용 프로그 램을 선택한 후 원격 데스크톱 을 클릭하고 원하는 응용 프로그램을 선택하십시오. rdesktop 1. LaunchBar에서 rdesktop 아이콘을 클릭합니다. 2. rdesktop 대화 상자에서 연결할 서버의 IP 주소 또는 도메인 이름을 입력합니다. 3. Windows ® 로그온 창이 열립니다. 관련 사용자 ID와 암호를 입력하여 해당 서버에 액세스합니다.
3. 다음에 나타나는 대화 상자에서 관련 사용자 이름, 암호 및 도메인을 입력합니다. 4. 로그인 버튼을 클릭합니다. 그러면 시스템이 엔터프라이즈 규칙에 따라 액세스를 허가받은 VMware 환경을 제공합니다.
목차 페이지로 돌아가기 "Chat" 인스턴트 메시징 사용 Chat 계정 설정 친구 및 그룹 추가 새 그룹 추가 Chat 메시지 보내기 Chat 계정 설정 Chat 기능은 다양한 인기 인스턴트 메시징 도구에서 기존의 사용자 계정을 사용하여 친구들과 채팅할 수 있게 해 줍니다. "친구들"을 그룹으로 정리하고 기타 여러 기능을 실행할 수도 있습니다. 자세한 기본 설정을 지정하고 여러 IM 계정에 동시에 로그인할 수 있습니다. Chat 아이콘을 클릭하십시오. Chat를 처음으로 시작하면 계정 대화 상자가 열립니다. 기존 IM 계정 중 적어도 하나를 Chat와 함께 사용하도록 지정해야 합니다. 1. 2. 3. 4. 지원되는 프로토콜 중 적어도 하나에서 사용자 계정을 이미 하나 이상 만들었는지 확인하십시오. 계정 창에서 추가 버튼을 클릭합니다. 계정 추가 창이 열립니다. 기본 탭에서 프로토콜 드롭다운 목록을 열고 추가할 계정(AIM, MSN, Yahoo 등)과 관련된 프로토콜을 선택합니다.
메시지를 보낼 친구 이름을 두 번 클릭한 다음 새 인스턴트 메시지 대화 상자에 메시지를 입력합니다. 다른 방법으로는, Chat 창의 친구 메뉴에 서 새 인스턴트 메시지...를 선택한 다음 메시지를 보낼 친구의 별칭이나 화면 이름을 입력할 수도 있습니다.
목차 페이지로 돌아가기 Latitude ON™ Flash 전자 메일 설정 Latitude ON™ 모드에서 전자 메일을 보내거나 받기 전에 Latitude ON Flash와 함께 사용하고 싶은 웹 기반 전자 메일 클라이언트를 지정해야 합니다. 처음 시작 마법사 도중 웹 기반 전자 메일 클라이언트를 지정할 기회가 있었습니다. 처음 시작 마법사 도중 이 설정을 건너뛰었다면 LaunchBar 또는 Latitude ON Flash와 주 화면에 있는 메일 아이콘을 처음으로 클릭하면 같은 대화 상자가 나타납니다. 메일 아이콘을 클릭하십시오. Latitude ON Flash와 함께 사용할 웹 기반 전자 메일 서비스를 이미 지정했다면 그 웹 기반 전자 메일 서비스의 "로그인 페이지"가 자동 으로 시작되고 평소와 같이 로그인과 암호를 입력할 수 있습니다. 아직 웹 기반 전자 메일 서비스를 지정하지 않았다면 전자 메일 응용 프로그램 설정 편집 대화 상자가 열립니다. 사용하고 싶은 전자 메 일 서비스를 선택하십시오.
목차 페이지로 돌아가기 LaunchBar 사용 기본값으로 LaunchBar는 Latitude ON 화면 아래쪽에 있습니다. (설정 패널에 있는 LaunchBar 아이콘을 클릭한 다음 방향을 설정하면 LaunchBar 위치를 변경할 수 있습니다.) LaunchBar에 있는 아이콘을 클릭하여 응용 프로그램들 간에 실행/전환하거나 다양한 유틸리티를 시작하십시오. LaunchBar에 있는 각 아이 콘은 아래에 하나씩 설명되어 있습니다. 메일. Latitude ON Flash와 함께 사용하도록 지정된 웹 기반 전자 메일 응용 프로그램에 액 세스하려면 이 아이콘을 마우스 왼쪽 버튼으로 클릭하십시오. 전자 메일 응용 프로그램이 아 직 지정되어 있지 않으면 전자 메일 응용 프로그램 설정 편집 대화 상자가 열립니다. 아이콘 을 마우스 오른쪽 버튼으로 클릭하여 언제든지 메일 응용 프로그램 설정 편집 대화 상자를 열 수도 있습니다. 웹. World Wide Web 액세스에 이용할 웹 브라우저를 시작합니다.
WWAN 아이콘이 표시됩니다. (장치는 발견되지만 사용하지 않도록 설정되어 있으면 표시로 나타납니다.) 아이콘을 마우스 포인터로 가리키면 현재 WWAN 연결 상태와 검출된 신호 강도가 표시됩니다. 아이콘을 클릭하면 네트워크 구성 대화 상자가 열리고 WWAN 탭이 활성 상태가 됩니다. 네트워크 상태. 아이콘을 마우스 포인터로 가리키면 현재 LAN과 WiFi 연결 상태가 표시됩니 다. 이 아이콘을 클릭하면 네트워크 구성 대화 상자가 열립니다. 이 대화 상자는 설정 패널에 서도 열 수 있습니다. 볼륨. 이 아이콘을 클릭하면 설정 패널에 있는 볼륨을 클릭하면 열리는 것과 같은 볼륨 컨트 롤 상자가 열립니다. 아이콘을 마우스 포인터로 가리키면 메인 스피커와 마이크의 현재 볼륨 설정이 표시됩니다. 도움말. 이 아이콘을 클릭하여 Latitude ON Flash 의 메인 온라인 도움말에 액세스하십시 오.
목차 페이지로 돌아가기 설정 패널 사용 설정 패널을 열려면 LaunchBar에서 아이콘을 클릭합니다. 그런 다음 설정 패널에서 원하는 아이콘을 클릭하여 해당 구성 도구를 엽니 다. 사용할 수 있는 도구는 다음과 같습니다. 날짜 및 시간. 날짜와 시간을 설정하고 표준 시간대를 선택할 수 있는 대화 상자를 엽니 다. Latitude ON 화면의 LaunchBar에서 시간 표시를 클릭하여 이 대화 상자를 열 수도 있습 니다. 입력 언어. SCIM (Smart Common Input Method) 입력 언어 기능의 입력 방식, 언어 및 옵션을 조정할 수 있습니다. 참고: 이 기능을 사용하려면 입력 언어 서비스 사용 확인란을 선택하십시오. 그 다음에 Latitude ON Flash 의 편집 가능한 입력 필드 내에 텍스트 커서를 놓고 Ctrl + 스페이스를 누 르면 현재 SCIM 입력 언어가 활성화됩니다. SCIM 기능을 끄려면 Ctrl + 스페이스 바로 가 기 키를 다시 누르십시오.
원격 데스크톱: Latitude ON Flash 에 로그인할 때마다 첫 화면에서 선택할 수 있기 를 원하는 원격 데스크톱 응용 프로그램을 선택합니다. 사용자 계정. Latitude ON Flash 의 암호를 변경할 수 있습니다. 암호 만들기 규칙을 보려면 계정 설정 대화 상자에 있는 물음표 아이콘을 클릭하십시오.
목차 페이지로 돌아가기 Latitude ON 버튼/전원 버튼 동작 다음 표에는 전원 버튼이나 그 옆의 Latitude ON 버튼( )을 누를 때 컴퓨터의 현재 상태에 따라 나타나는 효과가 설명되어 있습니다.
목차 페이지로 돌아가기 Latitude ON™ Flash에서 지원되는 바로 가기 키 바로 가기 키 동작 Fn + F2 배터리 충전기 사용/사용 안 함 Fn + F4 Num Lock 사용/사용 안 함 Fn + ← 주변 광원 센서 사용/사용 안 함 Fn + → 백리트 키보드 사용/사용 안 함(설치된 경우) Fn + ↑ LCD 밝기 증가 Fn + ↓ LCD 밝기 감소 목차 페이지로 돌아가기 20091009a 20091005en
Back to Contents Page Obtaining source code for Open Source programs This product contains software that is licensed under the General Public License Version 2 (“GPL”) which is listed below in “GPL Software.” This product also contains software that is licensed under the Lesser General Public License Version 2.1 (“LGPL”) which is listed below in “LGPL Software.” We have included copies of the GPL and the LGPL in the Acknowledgements section. You will find the source code in an archive file in the C:\DELL s
libatk1.0-0 1.22.0-0 libbz2 1.0.3 libc6 2.7-10 libcdparanoia 3a9.8-11 libcups 1.1.20 libcupsys2 1.3.7-1 libdbus-glib-1-2 0.74-2 libdirectfb 1.2.0 libgail-gnome-module 1.20.0-1 libgcc1 4.2.4-1 libgconf2-4 2.22.0-0 libgconf2-4 2.4.0-1 libglib 2.16.6 libglib2.0-0 2.16.6-0 libglib2.0-0 2.17.4-0 libgpg-error 1.4.2 libgtk2.0-0 2.12.9-3 libjpeg 6.2.0 libkeyutils1 1.2-4 libltdl3 1.5.26-1 liborbit2 2.10.0-0 liborbit2 2.14.12-0.1 libpam0g 0.99.7.1-5 libpango1.0-0 1.18.
scim-tables 0.5.7 scim-thai 0.1.1 setuid-root program 3.26.1 squash file system patch 3.3 startup-notification 0.7 Terafik 2.900 The Linux Console Tools 0.2.3 this is the ASN.1 library used in GNUTLS 2.0.17 Ubuntu 8.10 ath9k driver for 2.6.27 kernel Ubuntu 8.10 Ubuntu 8.10 iwlwifi driver for 2.6.27 kernel Ubuntu 8.10 udev 116 usb storage patch 2.6.27.7 uvcvideo_official SVN20081112 uvcview 20071108 vbetool 0.7 WenQuanYi ZenHei 0.8.37 wirelss_tool 29 wpa_supplicant 0.6.
scim 1.4.7 Splashtop and the logo are registered trademarks of DeviceVM, Inc. in the U.S. and elsewhere. All other trademarks, product and company names, and logos are the property of their respective owners. Patented. US patent numbers 7,082,526 and 7,441,113. US and other patents pending.
Back to Contents Page Acknowledgements Official binaries of this product released by DeviceVM, Inc. are made available under the corresponding EULA. Portions of the source code to this product are available under licenses which are both free and open source.
1.3. "Covered Code" means the Original Code or Modifications or the combination of the Original Code and Modifications, in each case including portions thereof. 1.4. "Electronic Distribution Mechanism" means a mechanism generally accepted in the software development community for the electronic transfer of data. 1.5. "Executable" means Covered Code in any form other than Source Code. 1.6.
2.2. Contributor Grant. Subject to third party intellectual property claims, each Contributor hereby grants You a world-wide, royalty-free, nonexclusive license: 1. Under intellectual property rights (other than patent or trademark) Licensable by Contributor, to use, reproduce, modify, display, perform, sublicense and distribute the Modifications created by such Contributor (or portions thereof) either on an unmodified basis, with other Modifications, as Covered Code and/or as part of a Larger Work; and 2.
3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A.
Covered code is provided under this license on an "as is" basis, without warranty of any kind, either expressed or implied, including, without limitation, warranties that the covered code is free of defects, merchantable, fit for a particular purpose or non-infringing. The entire risk as to the quality and performance of the covered code is with you.
Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12.
Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time.
or menu items -- whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a "copyright disclaimer" for the program, if necessary. Here is a sample; alter the names: Yoyodyne, Inc., hereby disclaims all copyright interest in the program "Gnomovision" (which makes passes at compilers) written by James Hacker.
linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs.
application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works.
years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.
with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.
Copyright (c) 199x-200x , All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
1987, 1988, 1989 Digital Equipment Corporation, Maynard, Massachusetts.
conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All modifications to the source code must be clearly marked as such.
2.3.1 2.3 2002-2003 PSF yes 2.3.2 2.3.1 2002-2003 PSF yes 2.3.3 2.3.2 2002-2003 PSF yes 2.3.4 2.3.3 2004 PSF yes 2.3.5 2.3.4 2005 PSF yes 2.4 2.3 2004 PSF yes 2.4.1 2.4 2005 PSF yes 2.4.2 2.4.1 2005 PSF yes 2.4.3 2.4.2 2006 PSF yes 2.4.4 2.4.3 2006 PSF yes Footnotes: (1) GPL-compatible doesn't mean that we're distributing Python under the GPL. All Python licenses, unlike the GPL, let you distribute a modified version without making your changes open source.
BEOPEN PYTHON OPEN SOURCE LICENSE AGREEMENT VERSION 1 1. This LICENSE AGREEMENT is between BeOpen.com ("BeOpen"), having an office at 160 Saratoga Avenue, Santa Clara, CA 95051, and the Individual or Organization ("Licensee") accessing and otherwise using this software in source or binary form and its associated documentation ("the Software"). 2.
respect to Paragraphs 4, 5, and 7 of this License Agreement. Nothing in this License Agreement shall be deemed to create any relationship of agency, partnership, or joint venture between CNRI and Licensee. This License Agreement does not grant permission to use CNRI trademarks or trade name in a trademark sense to endorse or promote products or services of Licensee, or any third party. 8. By clicking on the "ACCEPT" button where indicated, or by copying, installing or otherwise using Python 1.6.
DeviceVM acknowledges all open source community members, and especially thanks contributors to the following open source projects that we leveraged in developing Splashtop®. If you find your project missing from the list below, please contact DeviceVM through your project lead, and we will add your project name to the list. To obtain the source code, please visit http://www.splashtop.com/developer. bbdock http://bbdock.nethence.com blackbox http://blackboxwm.sourceforge.net busybox http://www.busybox.