Users Guide

Connecting to a Network
Topics:
Setting Up Local Area Network (LAN) and Wireless Local Area Network (WLAN)
Connecting to a WLAN
Dell QuickSet Utilities/Dell ControlPoint
Mobile Broadband or Wireless Wide Area Network (WWAN)
Connecting a Network or Broadband Modem Cable
Before you connect your computer to a network, the computer must have a network adapter installed and a network cable (RJ-45)
connected to it.
1. Connect the network cable to the network adapter connector at the back of your computer.
NOTE: Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is securely
attached.
2. Connect the other end of the network cable to a network connection device or a network wall connector.
NOTE:
Do not use a network cable with a telephone wall connector.
Connecting to a Wireless Local Area Network (WLAN)
Before you can set up a WLAN Internet connection, you need:
High-speed (broadband) Internet access (such as cable or DSL)
A broadband modem that is connected and working
A wireless router or access point
NOTE:
Please check if your modem is wireless ready. If yes, you do not require a wireless router.
A wireless network card for each computer that you want to connect to your WLAN
A network cable with the network (RJ-45) connector
Contact your Internet Service provider for setting up the wireless network or follow the instructions provided by the wireless router
manufacturer
Follow the steps below to connect to a wireless network:
Windows 7
When you turn on your computer and a network (for which your computer is not configured) is detected in the area, a pop-up may appear
near the network icon in the notification area (in the lower-right corner of the Windows desktop).
1. Click Start , type network in the search box, and then click Network and Sharing Center > Set up a new connection or
network > Connect to the Internet. The Connect to the Internet window appears.
2. Follow the instructions on the screen to complete the setup.
Windows 8
1. Point to the upper-right edge of the screen to bring the charms menu and click Search.
2. In the search box, type network and then click Network and Sharing Center > Set up a new connection or network > Connect
to the Internet. The Connect to the Internet window appears.
NOTE:
If you select a secured network, you must enter a WEP or WPA key when prompted. Network security settings
are unique to your network. Dell cannot provide this information.
NOTE: Your computer can take up to 1 minute to connect to the network.
5
16 Connecting to a Network