Owners Manual

Table 4. Features and indicators of Precision 7910. (continued)
Item Indicator, Button, or
Connector
Icon Description
If the system stops responding during POST, press and hold
the system ID button for more than five seconds to enter
BIOS progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press and
hold the button for more than 15 seconds.
14 System identification
connector
Connects the optional system status indicator assembly
through the optional cable management arm.
15 iDRAC8 Enterprise port Dedicated management port.
16 Half-height PCIe expansion-
card slot (3)
Allows you to connect up to three half-height PCI Express
expansion cards.
17 Serial connector Allows you to connect a serial device to the system.
18 Video connector Allows you to connect a VGA display to the system.
19 USB connector (2) Allows you to connect USB devices to the system. The ports
are USB 3.0-compliant.
20 Full-height PCIe expansion
card slot (4)
Allows you to connect up to four single wall or two double
wide PCI Express expansion cards.
21 Ethernet connector (4) Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors that include:
● Two 10/100/1000 Mbps NIC connectors
● Two 100 Mbps/1 Gbps/10 Gbps NIC connectors
22 Power supply unit
AC 1100 W
Front bezel (optional)
Removing the front bezel
Steps
1. Unlock the bezel lock at the left end of the bezel.
2. Lift the release latch next to the bezel lock.
3. Pull the left end of the bezel, unhook the right end and remove the bezel.
Installing the front bezel
Steps
1. Hook the right end of the bezel onto the chassis.
2. Fit the free end of the bezel onto the system.
3. Secure the bezel with the keylock.
Installing and removing system components
15