Users Guide

Command Description

numVGPU Number of virtual machines to create (optional). Valid values are 0,4 and 8. The

Default numVGPU is 4, if not specified. This value is only applicable if the system is

equipped with the shared vGPU graphics option.

osType Operating System of virtual machine that gets created (optional). OsType values

should be separated by a comma. The default OsType is Windows 7 x64 for all VMs

created. The total number of

OsTypes should match with numVGPU values. OsType

values should be either 0, 1 or 2.

• osType 0=Windows 7 x64

• osType 1=Windows 8.1 x64

• osType 2=RHEL x64

After you type the command, press Enter to configure the virtual machines. You will get a notification if

there is any error in the command.

To verify if the virtual machine is configured, launch the VMware vSphere client, type the IP address that

you used during the configuration, and click Connect.