Dell Precision Tower 5810/7810/7910/1700MT/1700SFF/3620MT and Rack 7910 Thunderbolt Add-In-Cards Setup Guide August 2020 Rev.
1 Topics: • Setting up the Thunderbolt Add-In-Card Setting up the Thunderbolt Add-In-Card This section describes in brief on how to install the thunderbolt add-in-cards on a Dell Precision Tower 5810, 7810, 7910, Rack 7910, T1700 MT, T1700 SFF and 3620 MT. Pre-requisite actions before setting up a Thunderbolt card: 1. To utilize a Thunderbolt Add-In-Card (AIC) make sure you have a compatible Thunderbolt system board. 2. Install Thunderbolt software before installing the Add-In-Card (AIC).
2. Connect the display port to DisplayPort cable. Finding More Information and Resources See the safety and regulatory documents that shipped with your computer and the regulatory compliance website at www.dell.com/regulatory_compliance for more information on: ● Safety best practices ● Regulatory certification ● Ergonomics See Dell.
● Warranty ● Terms and Conditions (U.S. only) ● End User License Agreement Additional information on your product is available at https://www.dell.com/support. © 2017 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.
