Owners Manual

To see a video on how to remove & install a PCI card and riser, scan this QR code, or click here: http://www.Dell.com/QRL/Workstation/

R7910/PCI

Opening and closing the PCIe card holder latch

1. Ensure that you read the Safety instructions.

2. Follow the procedure listed in Before working inside your system.

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and

simple repairs as authorized in your product documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow

the safety instructions that came with the product.

1. To open the PCIe card holder latch, press the release tab.

2. To close the PCIe card holder latch, rotate the latch clockwise until it locks.

NOTE:

Before installing a full-length PCIe card, the PCIe card holder latch must be closed. When the full-length PCIe

card is installed, open the PCIe card holder latch. Before removing the full-length PCIe card, you must close the

PCIe card holder latch.

Figure 18. Opening and closing the PCIe card holder latch

a. PCIe card holder

b. release tab

c. PCIe card holder latch

Follow the procedure listed in After working inside your system.

Cable retention bracket

Removing the cable retention bracket

1. Ensure that you read the Safety instructions.

2. Follow the procedure listed in Before working inside your system.

Installing and removing system components