Owners Manual

Figure 32. Removing and installing the Internal Dual SD Module (IDSDM)

Internal Dual SD module 2. LED status indicator (2)

3. SD card (2) 4. SD card slot 2

5. SD card slot 1 6. IDSDM connector

The following table describes the IDSDM indicator codes.

Convention

IDSDM indicator code Condition

A Green Indicates that the card is online

B Flashing green Indicates rebuild or activity

C Flashing amber Indicates card mismatch or that the card has failed

D Amber Indicates that the card is offline, has failed, or is write protected

E Not lit Indicates that the card is missing or is booting

Follow the procedure listed in After working inside your system.

To see a video on how to remove & install the internal dual SD module and SD cards, scan this QR code, or click here: http://

www.Dell.com/QRL/Workstation/R7910/IDSM

Installing and removing system components