Owners Manual
Table Of Contents
- Dell Precision Rack 7910 Owner's Manual
- コンピュータ内部の作業
- LCD パネルの機能
- ハードドライブインジケータコード
- システムコンポーネントの取り付けと取り外し
- 安全にお使いいただくために
- システム内部の作業を始める前に
- システム内部の作業を終えた後に
- 推奨ツール
- システムの概要
- 前面ベゼル(オプション)
- システムカバーの取り外し
- システムカバーの取り付け
- システムの内部
- 冷却用エアフローカバー
- システムメモリ
- メモリモジュール取り付けガイドライン
- メモリ構成の例
- メモリモジュールの取り外し
- メモリモジュールの取り付け
- ハードドライブ
- 2.5 インチハードドライブダミーの取り外し
- 2.5 インチハードドライブダミーの取り付け
- ハードドライブの取り外し
- Installing Hard Drive
- ハードドライブキャリアからのハードドライブの取り外し
- ハードドライブキャリアへのハードドライブの取り付け
- オプティカルドライブ(オプション)
- 冷却ファン
- 冷却ファンの取り外し
- 冷却ファンの取り付け
- 冷却ファンアセンブリの取り外し
- 冷却ファンアセンブリの取り付け
- 内蔵 USB メモリキー(オプション)
- 内蔵 USB キーの取り付け
- PCIe カードホルダ
- ケーブル固定ブラケット
- 拡張カードおよび拡張カードライザー
- SD vFlash メディアカード(オプション)
- 内蔵デュアル SD モジュール(オプション)
- 内蔵ストレージコントローラカード
- ネットワークドーターカード
- ヒートシンクとプロセッサ
- 電源ユニット
- ホットスペア機能
- 電源ユニットダミーの取り外し
- 電源ユニットダミーの取り付け
- AC 電源ユニットの取り外し
- AC 電源ユニットの取り付け
- システムバッテリー
- ハードドライブバックプレーン
- ハードドライブバックプレーンの取り外し
- ハードドライブバックプレーンの取り付け
- コントロールパネルアセンブリ
- システム基板
- システムのトラブルシューティング
- システム起動エラーのトラブルシューティング
- 外部接続のトラブルシューティング
- ビデオサブシステムのトラブルシューティング
- USB デバイスのトラブルシューティング
- iDRAC ダイレクト(USB XML 設定)のトラブルシューティング
- iDRAC ダイレクト(ノートブック接続)のトラブルシューティング
- シリアル I/O デバイスのトラブルシューティング
- NIC のトラブルシューティング
- システムが濡れた場合のトラブルシューティング
- システムが損傷した場合のトラブルシューティング
- システムバッテリーのトラブルシューティング
- 電源装置ユニットのトラブルシューティング
- 冷却問題のトラブルシューティング
- 冷却ファンのトラブルシューティング
- システムメモリのトラブルシューティング
- 内蔵 USB キーのトラブルシューティング
- SD カードのトラブルシューティング
- オプティカルドライブのトラブルシューティング
- ハードドライブのトラブルシューティング
- ストレージコントローラのトラブルシューティング
- 拡張カードのトラブルシューティング
- プロセッサのトラブルシューティング
- エラーメッセージ
- システムメッセージ
- システム診断プログラムの使用
- ジャンパとコネクタ
- Specifications
- セットアップユーティリティ
- NIC インジケータコード
- 電源インジケータコード
- デルへのお問い合わせ

Controls and Lights Specification
solid amber light — the computer does not start, indicating a problem with the system board
or power supply.
blinking amber light — indicates a problem has occurred with the system board.
System ID button and light blue light — flashes (front and back of chassis) when the button is pressed. Press the
button again to turn it off.
Drive activity light blue light — blinking blue light indicates that the computer is reading data from, or writing
data to the hard drive.
Network link integrity lights (front): blue light — A good connection exists between the network and the computer.
off (no light) — The computer is not detecting a physical connection to the network.
Network link integrity and activity
indicator lights (rear):
Link and activity indicators are off — The NIC is not connected to the network.
Link indicator is green — The NIC is connected to a valid network at its maximum port speed
(1 Gbps or 10 Gbps).
Link indicator is amber — The NIC is connected to a valid network at less than its maximum
port speed.
Activity indicator is blinking green — Network data is being sent or received.
Table 21. Power
Power Specification
Coin-cell battery 3 V CR2032 lithium coin cell
Voltage 100 V to 240 V, 12.00 A to 6.00 A, 50 Hz to 60 Hz
Wattage 1100 W : 200 VAC to 240 VAC
Maximum heat dissipation 4774 BTU/hr
NOTE: Heat dissipation is calculated by using the power supply wattage rating.
NOTE: See the safety information that shipped with your computer for important voltage-setting information.
Table 22. Physical
Physical Specification
Height 8.73 cm (3.44 inch)
Width 48.2 cm (18.98 inch)
Depth 75.58 cm (29.75 inch)
Weight (Minimum)
• 31.4 kg (69.23 lb) (2.5 inch hard drive systems)
Empty Weight
• 20.8 kg (45.86 lb) (2.5 inch hard drive systems)
without front bezel 19.06 kg (41.92 lb)
Table 23. Environmental
Environmental Specification
Temperature:
Operating 10 °C to 35 °C (50 °F to 95 °F)
Storage -40 °C to 65 °C (-40 °F to 149 °F)
Maximum 20°C/h (36°F/h)
Restriction K6000/K20 cards + 160 w processor is limited to 30 c operating
temperature maximum.
100 Specifications