User manual

Using Your Projector 27
DISPLAY (in PC Mode)
Using the Display menu, you can adjust the display settings of your projectors.
The Picture menu, provides the following options:
V
IDEO MODE—Allows you to optimize the projectors display mode:
PC, Movie, sRGB (provides more accurate color representation), Game, and
Custom (set your preferred settings). If you adjust the settings for White Intensity
or Degamma, the projector automatically switches to Custom.
NOTE: If you adjust the settings for White Intensity or Degamma, the projector
automatically switches to Custom.
S
IGNAL TYPE—Allows you to manually select signal type RGB, YCbCr, or YPbPr.
Z
OOM—Press to digitally magnify an image up to 4 times on the projection
screen and press to reduce the zoomed image.
Z
OOM NAVIGATION—Press to navigate projection screen.
W
HITE INTENSITY—Set 0 to maximize the color reproduction and 10 to maximize
the brightness.
D
EGAMMA—Allows you to adjust among the 4 preset values (1, 2, 3, 4) to change
the color performance of the display.
H
ORIZONTAL POSITION—Press to move the image to the left and to move the
image to the right.
VERTICAL POSITION—Press to move the image down and to move the image up.