Specifications

PS4000 Hardware Maintenance Maintaining Control Modules
3–18
Replacing a Micro SD Card
1. Firmly push the card into its housing to release the spring mechanism
(Figure 3-12). The micro SD card will be partially ejected from the housing.
Figure 3-12: Ejecting the Micro SD Card
2. Gently pull the card straight out of the housing.
3. Place the micro SD card on a flat surface where it will be protected from
electrostatic charge.
4. To insert the micro SD card in the replacement control module, align the
micro SD card so the arrow on the card points towards the housing. See
Figure 3-13.