Users Guide

3–Configuration de Fibre Channel
Configuration d'un FA-PWWN
71 CU0354604-02 M
6. Dans le menu Enable Fabric Assign WWN (Activer le nom universel
attribué par la structure), sélectionnez 1: Enable (Activer).
7. Sélectionnez l'option Commit Changes (Valider les modifications).
Ce qui suit montre un exemple de configuration du FA-PWWN :
HBA Desc. : QLE2672 QLogic 2-port 16Gb Fibre Channel Adapter
FW Version : 7.04.00
WWPN : 21-00-00-OE-1E-11-4A-38
WWNN : 21-00-00-OE-1E-11-4A-38
Link : Online
===============================================================
1: Connection Options
2: Data Rate
3: Frame Size
4: Enable HBA Hard Loop ID
5: Hard Loop ID
6: Loop Reset Delay (seconds)
7: Enable BIOS
8: Enable Fibre Channel Tape Support
9: Operation Mode
10: Interrupt Delay Timer (100 microseconds)
11: Execution Throttle
12: Login Retry Count
13: Port Down Retry Count
14: Enable LIP Full Login
15: Link Down Timeout (seconds)
16: Enable Target Reset
17: LUNs per Target
18: Enable Receive Out of Order Frame
19: Enable LR
20: Enable Fabric Assign WWN
21: Commit Changes
22: Abort Changes
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please enter selection: 20
QConvergeConsole
Version 1.1.3 (Build 22)